Saturn ST-CC0220 Руководство по эксплуатации онлайн [5/49] 733142

Saturn ST-CC0220 Руководство по эксплуатации онлайн [5/49] 733142
4
7. Decorative pieces
8. Water Filling Cover
9. Light indicator
10. Water tank
11. Heel
12. Foot support
13. Plastic skirt
Filling the water
1. Remove the mains lead before filling
the water tank.
2. Ensure that the steam switch is
turned to the 0 position.
3. Fill the water (if the water is very
hard, we suggest using distillation wa-
ter). Do not fill the water tank higher
than the max mark.
4. After ironing, drain the water tank.
Dry ironing
1. Make sure that the iron voltage (see
name plate) and the mains voltage
match.
2. Insert the mains plug into a correctly
installed safety socket.
3. Sort out the garments according to
their ironing temperatures Start with
the lower temperatures.
4. The LED high up. As soon as it shuts
off, the set temperature is reached (ap-
proximately 3 min) Now you can start to
iron.
5. Always pull the plug out of the socket
after using the iron.
Steam Ironing
1. Make sure that the iron voltage (see
rating label) and the mains voltage
match.
2. Insert the mains plug into a correctly
installed safety socket.
3. Ensure that the steam switch is
turned to the 0 position. Turn the
temperature knob to the max, for sev-
eral minutes. (Water may leak from the
sole-plate if the temperature selected is
too low.)
4. The LED shut off. Ensure that the
steam switch is turned to the steam
position.
5. Release the steam for several sec-
onds, then iron the cloth. When use,
power lamp will switch off upon reach-
ing selected temperature and will con-
tinue to switch on and off indicating
maintenance of constant temperature.
6. After use, close the steam and tem-
perature variation. Disconnect the ap-
pliance from the mains.
Cleaning and storage
Fill the half of the water tank and place
it to the plate.
Make sure that the iron voltage (see
name plate) and the mains voltage
match.
Insert the mains plug into the socket
and set the temperature to the max.
The LED shut off. Ensure that the tem-
perature is reached.
Remove the plug from the socket.
Turn the steam switch to steam posi-
tion, then the dirt will come from the
hole with the steam.
Close the steam knob. Connect the
appliance.
Use the ironing on an old cloth. Empty
the water tank.
Close the temperature control, and
remove the plug from the socket.
Allow the iron to cool. Clean the iron
with a slightly moist cloth.
Specification
Power: 1000 W
Rated voltage: 220240 V
Rated frequency: 50 Hz
Rated current: 4.5 A
Net weight: 0,74 kg
Gross weight: 0,80 kg
Set
IRON 1
INSTRUCTION MANUAL
WITH WARRANTY CARD 1
PACKAGE 1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the
environment!
Please remember to respect
the local regulations: hand in
the non-working electrical
equipment to an appropriate
waste disposal center.

Содержание

Скачать