RME MADIface USB Руководство по эксплуатации онлайн [12/72] 757970

User's Guide MADIface USB © RME

Output Format

Defines the format of the MADI output signal. MADI can be a 56 or 64 channel signal. Sample

rates in Double Speed range (64/88.2/96 kHz) can be transmitted by the normal 48K Frame, or

using a native 96K Frame.

Options

TMS activates the transmission of Channel Status data and Track Marker information from the

MADI input signal. DIGICheck allows to read out those information from the MADI stream.

Output offers three options: 64 Channel Mix, 128 Channel Mix, Disable TotalMix. In 64 Channel

Mix mode TotalMix FX shows 64 input, playback and output channels. All settings in TotalMix

use the data from one MADI input port, and send identical data to both MADI output ports. In

128 Channel Mix mode record and playback is still limited to 64 channels, with the current input

selected in the Settings dialog. But the other input is also active for TotalMix, and the output

signal is not mirrored, but separated, with TotalMix having 128 output channels. Disable To-

talMix completely disables TotalMix FX. All input and output data is going straight to re-

cord/coming from playback, with no mixing or routing involved. In this mode the outputs are

mirrored, carrying the same signal.

Input defines the currently used main input, Optical or Coaxial. AutoSelect activates an auto-

matic input selection. Using both inputs at the same time, AutoSelect puts the device into

Seamless Redundancy mode. The MADIface USB will switch to the other input in real-time if

the current one fails.

Clock Mode

Sample Rate

Sets the currently used sample rate. Offers a central and comfortable way of configuring the

sample rate of all WDM devices to the same value, as since Vista this is no longer supported to

be done by the audio program. However, an ASIO program can still set the sample rate by it-

self.

At ongoing record/playback the selection is greyed out, so no change is possible.

Clock Source

The unit can be configured to use its own clock (Internal = master), or one of the input signals. If

the selected source isn't available, the unit will change to the next available one (AutoSync). If

none is available then the internal clock is used. The current clock source is displayed to the

right.

Input Status

Indicates for each input whether there is a valid signal (Lock, No Lock), or if there is a valid and

synchronous signal (Sync). The second row shows the sample frequency measured by the

hardware. The third row shows the input’s channel format (64 or 56 channels).

The About tab includes information about the current driver version as well as the current firm-

ware version of the MADIface USB plus two more options:

Lock Registry

Default: off. Checking this option brings up a dialog to enter a password. Changes in the Set-

tings dialog are no longer written to the registry. As the settings are always loaded from the

registry when starting the computer, this method provides an easy way to define an initial state

of the MADIface.

Enable MMCSS for ASIO activates support with higher priority for the ASIO driver. Note: At this

time, activating this option seems to be useful only with the latest Cubase/Nuendo at higher

load. With other software this option can decrease performance. The change becomes active

after an ASIO reset. Therefore it is easy to quickly check which setting works better.

RME MADIface USB Руководство по эксплуатации онлайн [12/72] 757970

Содержание

Похожие устройства