Luxstahl MARCO Ecosmart PB10 Руководство по эксплуатации онлайн [9/13] 764021

1900051 REV.3 Page 9 of 13

 Isolate machine from power supply.

 Isolate machine from water supply.

 ALLOW TO COOL COMPLETELY!

 Drain water from machine.

 Remove all lids.

 Remove as much scale as possible by hand, paying particular attention to level probes (White

plastic with steel tab). Be very careful not to damage any attachments.

The exterior of these machines may be cleaned with a damp cloth and a light detergent. Do not use

abrasive cloths or creams, as this will spoil the finish of the machine. Do not use a water jet or spray.

NB: Beware of accidentally operating the draw off tap or push button when cleaning the front of the

machine.

To Clean Dispense Tap (on Tap versions only):

 Isolate machine from power supply.

 Isolate machine from water supply.

 ALLOW TO COOL COMPLETELY!

 Drain water from machine.

 Tap bonnet assembly can be removed by rotating the black plastic assembly counter

LIMESCALE:

In common with all water boiler manufacturers, service calls resulting from limescale are not covered

by warranty. Fitting a scale reducer is recommended, especially in hard water areas. This can

reduce the build-up of scale but may not stop it altogether. The frequency that descaling is required

depends on the local water supply; hard water areas need more attention. Descaling of the machine