Candy GO4 1072D-07S [50/72] Door locked indicator

Door locked indicator B

The “Door Locked” indicator light is illuminated when the door is fully closed and the ma-

chine is ON.

When “START/PAUSE” is pressed on the machine with the door closed the indicator will

flash momentarily and then illuminate.

If the door is not closed the indicator will continue to flash.

A special safety device prevents the door from being opened immediately after the end

of the cycle.

Wait for 2 minutes after the wash cycle has finished and the Door Locked light has gone

out before opening the door. At the end of cycle turn the program selector to OFF.

“Start/Pause” button С

Press to start the selected cycle.

NOTE: Few seconds after the start the wash cycle will begin. During the first 4

minutes of the wash cycle, the “Kg DETECTOR” (active only on cotton and syn-

thetics programs) will weigh the clothes and update the maximum wash time re-

maining on the display every five seconds until the weight has been determined.

While this function is operating the “Kg DETECTOR” indicator is on.

CHANGING THE SETTINGS AFTER THE PROGRAMS HAS STARTED (PAUSE)

Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the

options buttons and time remaining indicator will show that the machine has been paused,

adjust as required and press the “START/PAUSE” button again to cancel the flashing

lights.

If you wish to add or remove items during washing, wait 2 minutes until the safety device

unlocks the door.

When you have carried out the manoeuvre, close the door, press “START/PAUSE” button

and the appliance will continue working where it left off.

CANCELLING THE PROGRAM

To cancel the program:

· Set the selector to the "OFF" position.

· Select a different program.

· Re-set the program selector to the "OFF" position.