Maxwell MW-3053 B [12/52] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Maxwell MW-3053 B [12/52] English

Maxwell MW-3053 B [12/52] English
12
ENGLISH
12
DRY IRONING
– Place the iron on its base (8).
– Insert the power plug into the mains socket.
– Turn the temperature control knob (11) to set
the required ironing temperature: «•», «••»,
«•••» or «max» (pic. 3), depending on the
type of fabric, the pilot lamp (9) will light up.
– Set the continuous steam supply knob (3) to
the position
(continuous steam supply is
off) (pic. 1).
– When the soleplate reaches the set temper-
ature, the pilot lamp (9) will go out, you can
start ironing.
– After you finish ironing set the temperature
control knob (11) to the “min” position.
– Pull the power plug out of the mains socket
and let the iron cool down completely.
STEAM IRONING
Steam ironing is possible only if the temperature
control knob (11) is set to the position «••»,
«•••» or «max».
The iron is provided with an anti-drip valve, that
stops water supply, if the soleplate temperature
is too low, it prevents dripping from the openings
of the soleplate (14). During heating and cooling
of the iron soleplate you will hear characteristic
clicks of the anti-drip valve opening/closing,
that indicate its normal operation.
– Place the iron on its base (8).
– Insert the power plug into the mains socket.
– Make sure that there is enough water in the
water tank (10).
– Turn the temperature control knob (11) to set
the required ironing temperature: «••», «•••»
or «max», the pilot lamp (9) will light up.
– When the soleplate (14) reaches the set
temperature, the pilot lamp (9) will go out,
you can start ironing.
– Set the necessary steam intensity with the
continuous steam supply knob (3).
– In the continuous steam supply mode,
steam will be released from the openings of
the soleplate (14) only if the iron is in hori-
zontal position. To stop the steam supply
put the iron vertically or set the continuous
steam supply knob (3) to the
position.
– After you have finished using the iron, set
the temperature control knob (11) to the
“min” position, and the continuous steam
supply knob (3) to the
position (pic. 1).
– Pull the power plug out of the mains socket
and let the iron cool down completely.
ATTENTION!
If steam is not supplied constantly during the
operation, check whether the temperature
control knob (11) and the steam supply knob (3)
are set properly and whether there is enough
water in the water tank (10).
BURST OF STEAM
• The burst of steam function is useful when
ironing of folds and can only be used at high
ironing temperatures – in this case the tem-
perature control knob (11) is set to «•••» or
«max».
• When the burst of steam button (4) is
pressed, steam will go out of the soleplate
intensively (pic. 5).
Note: - To avoid water leakage from steam
openings, press the burst of steam button (4)
with a 4-5 sec. interval.
VERTICAL STEAM
The vertical steam function can be used only
at high ironing temperatures (that is, when the
temperature control knob (11) is set to “max”).
Wait till the iron soleplate heats up, hold the iron
vertically at the distance of 10-30 cm from the
clothes, press the burst of steam button (4) with
a 4-5 seconds interval, steam will be supplied
from the soleplate openings intensively (pic.
6). To avoid dripping, do not perform vertical
steaming when the soleplate is heating up (the
pilot lamp (9) lights up).
Important information
• Vertical steam is not recommended for syn-
thetic fabrics.
• To avoid fabric burning, do not touch it with
iron soleplate while steaming.
• Never steam clothes on a person as the
steam temperature is very high, use a
clothes hanger or a stand.
• After you finish ironing, switch the unit off,
wait until it cools down completely, then
mw-3053.indd 12 18.11.2013 16:25:34

Содержание

Похожие устройства

Скачать