Maxwell MW-3004 VT [10/44] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Maxwell MW-3004 VT [10/44] English

Maxwell MW-3004 VT [10/44] English
10
ENGLISH
• If you need to refill the water tank during
ironing, turn off the iron and unplug the
power cord from the outlet.
• After you finish ironing, open the water
tank lid (2) and drain the remaining water.
IRONING TEMPERATURE
Before operating test the heated iron on the old
cloth to be sure that the iron sole (13) and the wa-
ter tank (10) are clean.
• Always check the recommended iron tempera-
ture indicated on the tag before ironing.
• If the tag does not list the recommended iron-
ing temperature, but you know the type of fab-
ric, then use the following table to determine
the proper temperature.
Signs Fabric type/temperature
•
Synthetics, nylon, acryl, polyester
(low temperature)
••
Silk/wool (medium temperature)
•••
Cotton/flax (high temperature)
• This table is only for smooth materials. Fabrics
of other types (crimped, raised etc.) are best
ironed at low temperature.
• First sort items by ironing temperature: wool
with wool, cotton with cotton etc.
• The iron heats up faster than is cools down. For
this reason it is recommended to begin iron-
ing at low temperature (for instance synthetic
fabrics). After that, move to higher temperature
ironing. Cotton and linens should be ironed
last.
• If an item is made from a mix of fabrics, then
the iron should be set for the fabric with the
lowest ironing (for instance if an item is made
from 60% polyester and 40% cotton, it should
be ironed at the temperature used for ironing
polyester “•”).
• If you cannot define the fabric the item is made
from, find a place on it that is hidden while wear-
ing and, on practice select the ironing tempera-
ture (always start at the lowest and gradually
raise it until you get the desired result.)
• Corduroy and other fabrics that start glossy
quickly should be ironed strictly in one direction
(along the lines) with slight pressure.
• To avoid appearance of glossy spots on the
synthetic and silk fabrics, iron them back-side.
SETTING THE IRONING TEMPERATURE
• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the re-
quired ironing temperature: “•”, “••”, “•••”
or “max” (depending on the type of fabric), the
(9) indicator will light up.
• When the sole temperature (13) reaches the
desired temperature value, the (9) indicator will
go out, you can start ironing.
Note: While steam ironing set the tempera-
ture «•••» or «МАХ».
WATER SPRAYER
• You can dampen the fabric by pressing the
spray button (4) several times.
• Make sure that there is enough water in the wa-
ter tank (10).
IRONING
• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the re-
quired ironing temperature: “•”, “••”, “•••”
or “max” (depending on the type of fabric), the
(9) indicator will light up.
• When the sole temperature (13) reaches the
desired temperature value, the (9) indicator will
go out, you can start ironing.
• After you finish ironing set the (11) regulator to
the “min” position.
• Pull the plug out of the socket and let the iron
cool down completely.
STEAM IRONING
For steam ironing set the temperature regulator to
«•••» or «МаХ».
• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Make sure that there is enough water in the wa-
ter tank (10), the (11) indication is not lighting.
• Set the temperature regulator (11) to the re-
quired ironing temperature: “•••” or “max”,
the (9) indicator will light up.
• When the sole temperature (13) reaches the
desired temperature value, the (9) indicator will
go out, you can start ironing.
• Turn the steam supply regulator (3) to set the
intensity of steaming, steam will start outgoing
from the openings of the sole (13).
• After you finish ironing set the (11) regulator to
MW-3004_correct.indd 10 16.08.2013 9:20:56

Содержание

Похожие устройства

Скачать