Sven HT-202 (SV-018177) [32/35] Active home theater

5.1 Active Home Theater

Speaker System with Bluetooth

ENG

ST-BY Mode

• To enter/exit this mode, press and hold down button MODE c on the front panel or button a on

the RC.

Bluetooth Mode

• In order to transmit signal in this mode it is necessary by rst to connect the device with a signal

source. For this purpose select the Bluetooth mode using MODE button c on the front panel of the

subwoofer or DVD/BT button g on the remote control. After 2-3 seconds the speaker system will

enter the search mode, «BT» mode is shown on the display a.

• It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,

notebook, smartphone, etc.). «HT-202», message will be displayed on the screen which it should be

connected with*.

• The «BT» indicator lights continuously when connection is successful. If there is no any connection,

the lighting of the «BT» indicator is intermittent. In this case the system should be switch over to the

search mode once again (to turn o and turn on a new)**.

• It is possible to control the player of a signal source from the remote control or using the button on

the front panel of the subwoofer when connecting to a signal source.

* You might have to enter “0000” code to connect some models of devices via Bluetooth.

** If an item has been already registered in the device list of a source, then the second search mode

activation is not obligatory. Choose only the item name and the “connect” command on the source.

Audio setting reset

• Press the button RESET d on the remote control to reset audio settings.

Notes:

• If the MSS is left unused for a long period of time, mind to switch it off with the POWER

switch (m, OFF position) and unplug the power cord n from the mains socket.

• To improve the sound quality, use the Line-Out port of your sound card.