Rovus 7688 [8/84] Problem possible reasons and solutions

Rovus 7688 [8/84] Problem possible reasons and solutions
8
PRODUCT USAGE
Using the normal steam function
Reminder:
If you rst use or reuse the product after a long time, it takes longer to generate steam than usual because the water needs 1-2 min to transfer in the main unit.
1. Pull and twist the quick release cord holder to unwrap the power cord completely. (Picture 3, image 1) Put the power cord into the cord clip and the unit switches
on. (Picture 3, image 2)
2. Plug in to the power supply (Picture 3, image 3). Press the power button ON (˝I˝). (Picture 3, image 4) The indicator on steam switch control panel starts ashing blue
and 120 °C red indicator on temperature control panel turns on and remains red. (Picture 3, image 5)
Hints:
This product has three steam cleaning modes and three steam temperatures. You can select suitable mode and temperature according to cleaning tasks.
3.
Press the button on steam switch control panel and enter into gentle mode. Blue LED lights on. (Picture 3, image 5) Continue to press the steam switch and enter
standard and strong mode. Gentle mode is for simple oor cleaning. Standard mode is suitable for daily oor cleaning and strong mode is for cleaning stubborn
stains
4.
The product has three temperatures: 120, 150, 200 C. (Picture 3, image 6) Power on and the product will enter automatically 120 oC mode. Press the temperature
switch and choose other temperatures.
5.
After choosing the cleaning mode and temperature, tilt the main unit and allow about 20-30 sec to heat up. Now you can push the product back and forth and
start cleaning. (Picture 3, image 7) If you need to put o the product, just press the Micro motion switch and enter ready mode. LED blue light ashes.
Smart Steam Upright switch
If you need a short break or leave during using, just position the main unit vertically to the cleaning head, the product will stop generating steam immediately and there is
no need to switch OFF or unplug from power. When ready to proceed pull back and tilt the main unit, the product will begin generating steam. (Picture 4)
Using carpet glider (available in accessory set)
Reminder:
When you clean the carpet with carpet glider, strong mode is recommended for better eect.
Using the steam mop with carpet glider can disinfect and remove odor from the carpet.
1.
Put the carpet glider on the carpet. Pick up the mop head with cleaning pad and stick into the glider. (Picture 5, image 8)
2.
After plugging in and turning power switch ON, tilt the main unit and preheat about 20-30 s and start push the product back and forth. (Picture 5, image 9)
Using removable handheld steam
Apart from cleaning the oor and carpet, it can also be used to cleaning in other places.
1.
While removing the handheld steamer from the main unit make sure power is o before taking the steamer. (Picture 6, image 1)
2.
Take the attached nozzle and match the steamer until you hear the click sound. (Picture 6, image 2)
3.
The handheld steamer is controlled through the micro motion touch sensor. You just need to press the micro motion touch sensor to generate steam and loose
your hand to stop generating steam. (Picture 6, image 3)
4.
Press the button at the two sides of the nozzle and pull it o.
CARE AND MAINTENANCE
After use and storage
1. When you have nished using the steam mop, switch OFF the unit and unplug the cord from the outlet and place the device into the upright position. Let the unit
cool for 2-3 minutes.
2. Remove the cleaning pad.
3. To store the unit hanging up, hang it on a large hook, otherwise put upright against the wall.
4. Empty the water tank before storage if you don’t plan to use it for a long time.
Steamer cleaning
1.
In order to prolong the service life, the steamer should be cleaned regularly.
2.
After using 10-15 times, pour water into the water tank and tighten the cover. Shake the product hard and empty the water tank.
3.
If you nd that the steam reduces, it is time to clean the nozzle. You can insert a needle into the nozzle and remove the incrustation. (Picture 7)
Cleaning pad care
1.
We recommend washing your microbre cleaning pad separately from other fabrics to avoid picking up lint. Only use liquid detergent (no powder detergent).
Don’t use any fabric softeners or bleach. Line dry. Do not tumble dry. (Picture 8, image 1)
2.
If there are loose threads on the microbre cleaning pad carefully cut the thread with scissors. Don’t pull on them or cut at the base. (Picture 8, image 2)
TROUBLE SHOOTING
Problem Possible Reasons and Solutions
Steam mop cannot turn -on. 1. Check if the power button is turned ON.
2. Check whether the plug is securely plugged into the electrical outlet or
not.
3. Check your fuse or breaker.
Steam mop cannot make steam. 1. Check whether there is water in water tank.
2. Check if the steam switch is on.
3. Check if the unit is tilted. When you upright the main unit and vertical to
the cleaning head, the product will stop generating steam.
4. (In case of handheld unit) Make sure you hold the handle of the steamer.
Steam mop leaves water on the oor. 1 Check to see if the cleaning pad is too wet.
2 After plugging in, allow 20-30 s to heat up. Otherwise the steam
temperature will be not high enough.

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 0

Сколько бар?
1 год назад