Delfa UVC-5220 [8/16] Cleaning and maintenance

Rechargeable vacuum cleaner | UVC-5220

ENGLISH

OPERATION OF THE DEVICE

1. The battery should be fully charged.

2. To activate the vacuum cleaner, press and hold for 1 second the on/off button (2).

3. If you want to increase the suction power, press the power button (2) again.

4. After cleaning, press the button (2) to turn off the vacuum cleaner.

Cleaning area LED-light allows to clean half-light places under tables, beds and sofas better.

CLEANING AND MAINTENANCE

Control the ﬁlling of the dust collector. As soon as the amount of debris in the

container reaches the «Max» mark is required to clean the dust collector.

1. Turn off the vacuum cleaner.

2. Disconnect the extension tube and a turbo brush.

3. Press the button (1) to disconnect dust collector from the vacuum cleaner.

4. Click on the cover lock of dust collector. Open it and remove the debris.

5. Turn the lid of the ﬁlters and align the color label on the lid marked «Open» on the

housing of the dust collector.

6. Open the dust collector and remove all ﬁlters.

7. Rinse the ﬁlters and the housing of the dust collector under running water.

8. When the body of the dust collector and the ﬁlter has fully dried, assemble the dust

collector.

9. Install the lid of the ﬁlter housing of the dust collector and turn it until it stops by

aligning the color label on it labeled «Lock» on the body of the dust collector.

CLEANING THE TURBO BRUSH

1. Open the latch of the brush.

2. Remove the plastic bar, and then remove the brush.

3. Remove the tangled on the brush hair, thread and other debris.

4. Rinse the brush under running water and give it time to dry.

5. Install the brush into place and secure the latch.