Nuova Simonelli Aurelia II 3 Gr V Руководство по эксплуатации онлайн [69/214] 774410
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Nuova Simonelli Aurelia II 3 Gr V Руководство по эксплуатации онлайн [69/214] 774410

Nuova Simonelli Aurelia II 3 Gr V Руководство по эксплуатации онлайн [69/214] 774410
71
NLI
has an associated value, the starting up time
of the cup-warmer is given by adding up the
values of the first unit’s lit-up keys.
The same counting method is used for the
cup-warmer switching off time with the keys
of the second unit.
Keys 1° GROUP
(time ON)
2° GROUP
(time OFF)
2 minutes 5 minutes
4 minutes 10 minutes
8 minutes 20 minutes
16 minutes 40 minutes
If at least one of the two times is null, the cup
warmer will operate normally.
LEVELLING PUMP ACTIVATION
Access the programming of the first group
according to the relative procedure.
Press the second unit continuous
key
(the key will light up).
Press the second unit 1 small coffee
key.
NOTE: If the I small coffee
key is lit up,
the pump will start up during the level.
If the 1 small coffee
key is not lit
up, the pump will not start up during the
level.
Press the second unit continuous
key.
In this way the selected pump setting is
stored.
To exit the programming, press the first
unit continuous
key.
NOTE: The settings will be saved even when
exiting the first unit programming directly.
ADJUSTING KEYBOARD LIGHTING
INTENSITY
Access the programming of the first group
according to the relative procedure.
Press the second unit continuous
del
delivery key.
The second unit 2 long coffees delivery
key will flash on and off.
Press the key more than once to vary the
light intensity.
NOTE: You can set a maximum of five different
degrees of light intensity.
To store the set light intensity values in the
memory, press the second unit continuous
delivery key.
To exit the programming, press the first unit
continuous delivery key
.
NOTE: The settings will be saved even when
exiting the first unit programming directly.
STEAM NOZZLE WITH TEMPERATURE
PROBE (OPTIONAL)
Make sure the temperature probe is con-
nected to the control unit.
The temperature value can be planned by
sampling or manually depending by the
types of memorization planned in the param-
eter setting section and value goes from a
minimum of 50°C to a maximum of 95°C.
By pressing the
key of the second
group is possible to chose if you wont set the
steam temperature value manually or by
sampling.
When you enter in this part of the menu, the
key of the second group is switched on.
By pressing the key of the second
group, it is possible to change the way in
which settings are stored to memory.
Pressing the
two short coffees key will
change the memory storage mode.
Press the continuous delivery key
for
the 2nd unit to memorise the temperature
value input mode.
Sampling:
After entering in the program of the first
group, put a jag with milk under the steam
wand and press the
key, the delivery
of steam will start.
By pressing again the
key, or if it is
reached the maximum temperature, the con-
trol board memorizes the temperature
reached. (If the temperature of the milk
reaches the maximum level, steam delivery
is stopped and the maximum value is set in
the control unit).

Содержание

Похожие устройства

Скачать