Sencor Element P005V [11/25] Getting started

EN 9

Getting started

3. Getting started

3.1. Inserting SIM and memory cards

A SIM card must be inserted into the phone before it is ﬁrst used. Your telephone operator

will provide the SIM card.

When purchasing services from the mobile network, you receive aSIM card together with

details including your PIN code and the optional services that are available.

NOTICE:

Do not bend the SIM card and prevent it from being scratched. Do not expose

the SIM card to static electricity, water and dirt. When inserting and removing

SIM cards and the memory card, be careful not to damage the slots and base

plate of the telephone.

WARNING:

Prior to handling cards (SIM and memory) unplug the charger, switch the phone

off and remove the battery.

To open the back cover, lift it with your ﬁngernail or ablunt object at the lower edge at

the location of the cut-out. Gradually release the cover around the entire perimeter of the

phone.

Lift the battery with aﬁngernail or ablunt object at the bottom edge in the place of the

cut-out.

Insert the SIM card in the appropriate slots with contacts facing downwards so that the

contacts on the SIM card touch the built-in SIM contacts in the phone. Insert the SIM card

1 into the left slot by the skewed corner located in the upper left corner of the slot; insert

the SIM 2 card into the right slot by the skewed corner located in the upper left corner of

the slot.

Insert the memory card into the slot located in the right lower corner of the area under the

battery. Insert the memory card with the contacts facing downward so that the memory

card contacts touch the built-in contacts for the memory card in the telephone and the

edge of the memory card with cuts is facing the lower edge of the area for the battery.

NOTICE:

If the memory card does not work, make sure it is properly installed and has goof

contact. The maximum size of supported memory cards is 8 GB.

Element P005V EN CZ SK HU PL.indb 9 30.06.2016 10:34:08