RCF HL 2260 [6/28] Description

ENGLISH

RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN

DESIGNED TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE.

DESCRIPTION

INSTALLATION

HL 2240, HL 2260 and HL 2290 are horn loaded two-way loudspeakers for array systems

for mid distance and long throw applications, both indoors and outdoors.

HS 2200 is the matched 18” subwoofer.

All trapezoidal enclosures are made of multi-ply Baltic birch plywood and nished in a very

resistant, textured, polyurea black paint.

Every enclosure shape has a 22.5° coupling angle.

Connections to ampliers are made through watertight ‘Amphenol’ 4-pole connectors.

Front grilles are made of custom perforated steel, epoxy coated, with open-cell bres and

water repellent woven fabric backing.

HL 2240, HL 2260, HL 2290

The three models only differ in their horizontal coverage angle:

40° (HL 2240), 60° (HL 2260), 90° (HL 2290).

Each speaker:

- is equipped with RCF precision transducers: two 12” woofers and a 1.5” titanium

compression driver (with 4” voice coil)

- is very compact, provides a high sound pressure level and an accurate sound reproduction

- has a 22.5° vertical dispersion and can be either used in point source congurations for

mid distances or clustered with narrower angles for long-throw applications.

HS 2200 SUBWOOFER

It is equipped with a single 18” woofer (RCF precision transducer) with a 4” voice coil.

Loudspeakers need to be installed securely by qualied personnel, respecting all safety

standards. Make sure support structures (walls / ceilings / trusses) have the necessary

mechanical characteristics for the total loudspeaker weight, without the risk of a fall that

could damage things or cause injuries. Use suitable attachments elements only.

Warning: never make arrays With more than 6 speakers (each)!

HL series speakers (and HS 2200 subwoofers) can be installed as suspended line arrays,

each including from 2 to (max.) 6 speakers. A single speaker installation is not

foreseen.

At least a ybar (that needs to be purchased, model RCF FLYBAR HL 2260) is necessary.

Line arrays can be hanged by using chains and M20 D-shackles (not included).

M10 screws for the front side and M12 screws with nuts for the rear side are included.