Rode Podcaster [10/12] Setting up the podcaster

- 10 -

Setting up the Podcaster

Mounting the Podcaster

The Podcaster comes with a stand mount that

will allow you to connect it to a microphone

stand or ‘Anglepoise® style’ arm such as the

RØDE PSA-1.

The mount comes with a 3/8” brass insert that

can be removed. Once removed the internal

thread of the mount is a 5/8” thread. This allows

the mount to be used on either a US 5/8” stand

or pole or a Euro 3/8” stand or pole.

Also on the mount is a thumb screw which when

loosened will allow the mount to rotate to enable

you to angle your microphone to the most

appropriate direction.

To mount the microphone into the clip follow the

steps below.

• Remove the locking collar from the base of

the microphone.

• Slide the base of the microphone into the

hole in the stand mount.

• Screw the locking collar back into position to

carefully secure the Podcaster to the mount.

• Now, loosen the thumbscrew on the stand

mount and adjust the microphone to

the desired angle. Once set, tighten the

thumbscrew to secure the microphone in

place.