Kurzweil KA110 [23/40] Song recording
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kurzweil KA110 [23/40] Song recording

Kurzweil KA110 [23/40] Song recording
Song Recording
With the easy-to-use song recording features, you can record your
own keyboard performances as a user song. 5 user songs can be
recorded with 6 tracks (1 ACCOMP track, 5 MELODY tracks) each.
Among them, the accompaniment track is used for recording style and
this recorded track is user song's accomp. Melody tracks are used for
recording melodies.
Accomp track and melody track can be recorded together, but you
cannot record two melody tracks at the same time. Of course you can
only record accomp or melody. Accomp and several melody tracks
can simultaneous playback. The recorded data will not lose when you
turn off the power.
Start Recording
Before you start recording, you need to select a user song to keep the
recording song, and set the recording tracks.
Holding down [SHIFT] button, then press the [RECORD] button to
enter user song selection mode. The LCD displays "RecSong1”
and sequence number. 3 user songs can be recorded.
Press [+/YES]/ [-/NO] button to select the user song you want to
record.
Holding down [SHIFT] button, then press the [RECORD] button
again to enter record preparation mode. LCD lightens the “REC”
flag, and the [START/STOP] button on the panel will light up. It
automatically select a empty track to record your performance. The
button of track (ACCOMP, MELODY1 to MELODY 5) will flash to
indicate which track you would record.
In the recording preparation status, you can adjust parameters
such as the voice, style and tempo. When recording a new song,
It will automatically select “Melody 1” as the recorded track.
Holding down [SHIFT] button, then press “ACCOMP” (or
“MELODY1” to “MELODY 5”) to make your own selection.
The ACCOMP track and one of MELODY track can be recorded
at the same time, but it cannot record two MOLODY track
simultaneously.
Press [START/STOP] button or play the keyboard to start
recording. The [RECORD] button lightens. When choosing
the accomp tack and A.B.C. is open, play an effective chords in
left hand section or press [START/STOP] button would start
recording.
Style can only be recorded in “Accomp” track. The recording track
instructions LED has three states: Blinking, Light, Go out.
It means the track was chose for recording. If the track
have recorded data, the original data will be replaced.
It means this track have data, the recording process will record
data with playback the recorded track at the same time.
It means this track has no data or has data which can not
playback when recording.
When recording an existing song, the keyboard will automatically
select the empty track next to the occupied track. For example, if
“Melody 1” is occupied, then “Melody 2” will be selected as the
record track. When all 6 tracks have been recorded and a specific
track needs to be revised, press the button of that track and start
recording. The original data will be replaced.
1.
2.
3.
4.
Note:
Blinking:
Light:
Go out:
23

Содержание

Похожие устройства

Скачать