ELECTRO VOICE 635ND-B [2/2] Architects and engineers specifications

12000 Portland Avenue South, Burnsville, MN 55337

Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

Part Number 534671 Rev C

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321

For technical assistance, contact Technical Support at:

800/392-3497 or 952/736-4656

Specifications subject to change without notice.

Dimension Drawing:

Frequency Response: Wiring Diagram:

Architects’ and Engineers’

Specifications:

The microphone shall be an omni directional dynamic type with

wide-range response uniform from 80 to 13,000 Hz. It shall

have a nonmetallic diaphragm and an internal pop filter and

magnetic shield to prevent dust and magnetic particles from

reaching the diaphragm. The impedance shall be such that the

microphone will match 50-, 150- and 250ohm inputs. The line

shall be balanced to ground and phased. The output level shall

be 2.8 mV/pascal. The magnetic circuit shall be nonwelded and

employ a neodymium alloy magnet. The microphone shall have

a maximum diameter of 36 mm (1.42 in.), a length of 148 mm

(5.84 in.) and a weight of 170 g (6 oz). Finish shall be

nonreflecting fawn beige (635N/D) or semi gloss black (635N/

D-B). The microphone shall have a built-in XLR-type connector,

and shall include a 5/8”-27 thread stand adapter. The

Electro-Voice 635N/D and 635N/D-B are specified.

635N/D Part Number:

• 6352332

635N/D-B Part Number:

• 6352333