Lincoln LS (2004) [306/320] Maintenance and specifications

Lincoln LS (2004) [306/320] Maintenance and specifications
1
Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2
Add the coolant type originally equipped in your vehicle.
3
Your vehicles rear axle is filled with a synthetic rear axle lubricant and
is considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water. Fill 6
mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
4
Ensure the correct automatic transmission fluid is used. MERCON and
MERCON V are not interchangeable. DO NOT MIX MERCON and
MERCON V. Refer to the Scheduled Maintenance Guide to determine
the correct service interval.
5
Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by a qualified service technician.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C153H and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item Ford part name Ford part
number
Ford
specification
Brake fluid Motorcraft High
Performance DOT 3
Motor Vehicle
Brake Fluid
1
PM-1 ESA-M6C25-A
and DOT 3
Door
weatherstrips
Silicone Lubricant XL-6 ESR-M13P4-A
Door latch,
hood latch,
auxiliary hood
latch, door
hinges, striker
plates, seat
tracks and fuel
filler door hinge
Multi-Purpose
Grease
XG-4 or XL-5 ESR-M1C159-A
or
ESB-M1C93B
2004 Lincoln LS (dew)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
306

Содержание

Похожие устройства

Скачать