Hyundai Rocket HI1 [9/48] Operation

Gas forced heater

5. OPERATION

Start

1. Install the switch in position « I » Fig. 3 and make sure that the fan is working properly.

2. Click gas valve, while pressing the button repeatedly piezoelectric element until then, until the

ames. Fig. 4.

3. When the system detects ame hold button valve within approximately 10 seconds. Fig.5. If aer

that, the heater will switch o, wait one minute and repeat the operation, hold down the button of

the valve a little longer.

Shutdown

To turn o of the appliance you need to close the crane of gas cylinder. Let the fan runs until the

ame shall not be quenched. Aer that, install the switch fan position «O».

Ventilation mode

Appliance can be used as a fan. In this case, disconnect the gas hose and insert the plug into the

outlet. To install the switch in position «On».

ATTENTION!

If the ignition has not happened immediately before to repeat the

operation, make sure that the fan is not blocked, and that the input

and output of the air nothing prevents.Do not use the heater during

sleep.

Always use only certied, recommended by the manufacturer,

and properly rated hoses/pressure reducers for connection of the

appliance.

Always use only the gas type indicated by the manufacturer.

Fig. 3 Fig. 4 Fig. 5