Lincoln Navigator (2002) Navigation System [42/48] Troubleshooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Lincoln Navigator (2002) Navigation System [42/48] Troubleshooting

Lincoln Navigator (2002) Navigation System [42/48] Troubleshooting
TROUBLESHOOTING
Symptoms Possible Cause/Remedy
System does not start, screen is
dark.
•Turn on the ignition. Ignition
already switched on; system is in
stand-by mode:
•Press the ENTER.
•Press On/Off button.
After a period of normal operation
the system switches off (screen is
dark).
The temperature protection circuit
has turned off the system
automatically to prevent damage
from the system at extreme low or
high temperatures. The system will
switch on again as soon as normal
temperature is obtained.
System reacts slowly to key
presses or calculations take very
long.
You are in a densely mapped area.
The system has to read a large
amount of data from the CD-ROM.
9Guidance9 option can not be
selected from the 9Navigation
menu9.
Make sure that you entered a
destination address.
System plans no route although a
destination was entered.
Vehicle is not on a mapped road.
•Drive in the direction of a
mapped road.
Guidance advice is not audible. •Make sure that 9Voice9 is set to
9on9 in the 9System Settings9 menu
(
icon is not in the display).
• Make sure that the 9Volume9 is
not set to minimum in the 9System
settings9 menu.
Some of the items shown in the
instruction manual are not visible
in the status line.
•Activate / deactivate the desired
items with options 9Status line left9
and 9Status line right9 in the
9System Settings9 menu.
Only 9Stand-by9 can be selected in
the 9Start menu9 after turning the
ignition to 9on9.
•Wait a few seconds until the
system has initialized (options
appear in the highlighted letters).
Storing the address is not possible
in map display mode.
•Decrease map scale value to
400 ft, 800 ft, 1/4 mile or 1/2 mile
(100 m, 200 m, 500 m or 1 km)
Troubleshooting
42

Содержание

Похожие устройства

Скачать