Caso Cafe Crema Touch [68/214] Change the mode

15.9 Reset to factory settings

Press and hold and buttons at same time, until the device beeps twice. This

resets the factory setting and your individual settings for the amount of water and milk

foam are deleted.

15.10 Change the mode

You can set the device to different mode. The different mode are as follows:

Function/mode

ECO (energy-saving

mode)

Fast

Standard

Selected mode can be

recognized as follows

Button lights

continously and the

others are flashing

Button

lights continously

and the others are

flashing

Button

lights continously

and the others are

flashing

Illumination

Prebrewing*

Saving of filling level

Automatic switching off

After 10 minutes

After 30 minutes

After 20 minutes

* Pre-brewing: With less water pressure, the ground coffee is moistened and pre-brewed.

Then the device brews with normal water pressure and prepares the coffee.

Press and hold the until the device beeps twice. Then the button will flash and

you can see which mode is already selected (look at the table). Press the respective

button for the switch to the selected mode. For Example when switching to the Eco mode

press the button. Two signal tones sound. If the mode should be retained then

press or wait 5 seconds.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining

the device. Please observe the notices to prevent damages due to cleaning the device

incorrectly and to ensure trouble-free operation.