![FRAMUS 1036860315CPMMPOTF [36/44] The easy access electronics compartment](/img/pdf.png)
FRAMUS 1036860315CPMMPOTF [36/44] The easy access electronics compartment
![FRAMUS 1716835315BPMAHM3L [36/44] The easy access electronics compartment](/views2/1991927/page36/bg24.png)
ENGLISH 36
Machine heads
This closed, oil-based system is maintenance-free. You can adjust the
turn resistance of the tuning head with the top screw. Use a tuner if
possible. The best results are achieved while tuning up and not down
towards the desired pitch.
The Easy Access™ electronics compartment
The electronics compartment can be opened and closed without the
need of a tool. Just loosen both plastic clips so that the cover can be
removed.
Bridge system setup
Framus Vibrato by Wilkinson
The bridge’s height can be adjusted with the two anchor studs. Each individual string can be
adjusted in height with the saddle’s two Allen screws, allowing for a personal setup of the
string’s curvature against the fretboard. The intonation adjustment on this bridge can be
done without loosening the string’s tension by just turning the corresponding adjustment
screws. The vibrato’s arm is just inserted into the socket and if it appears too lose it can be
tightened through the back of the guitar with the tightening screw.
The bridge is mounted as a floating system and the balance is achieved from the relations-
hip between the strings’ pull and the bridge’s spring tension. A change in string gauge will
most certainly require a spring tension adjustment. ---> Next page picture, picture page.
(1) Spring tension adjustment,
(2) Bridge height adjustment,
(3) Individual string height adjustment,
(4) Intonation adjustment,
(5) Vibrato arm socket (inserted),
(6) Vibrato arm tightening screw
Содержание
- Construction p.2
- Owner manual for framus guitars p.2
- Outfitting p.2
- General information about framus guitars p.2
- Control elements p.2
- Instrument care and maintenance p.3
- Glossary p.3
- General specifications p.3
- Standard models p.4
- Philosophy p.4
- Introduction p.4
- General information about framus guitars p.4
- Custom shop p.4
- Swamp ash or basswood guitars solid body p.5
- Swamp ash body with flamed maple top solid body p.5
- Outfitting p.5
- Model overview p.5
- Body woods p.5
- Laminated bodies semi acoustic guitars p.6
- Hollow body full resonance guitars p.6
- Body with tcs tone chamber system p.6
- Semi hollow bodies semi acoustic guitars p.6
- Mahogany body with flamed maple top solid body p.6
- X x x x p.7
- English 7 p.7
- Rosewood is basically the most used wood for fingerboards period it differs from ebony in its density and hardness p.8
- Ovankgol neck with tiger stripe ebony fingerboard p.8
- Ovangkol neck with rosewood fingerboard p.8
- Ovangkol is a west african hardwood with the best tonal properties high density allows for stability and sound quality sustain and warmth shapes its character the outstanding sound properties of tiger stripe ebony are a result of its ex treme hardness and stiffness it gives the instrument a quick response and a finely illuminated sound picture over the whole frequency spectrum p.8
- Ovangkol and maple rosewood and tiger stripe ebony are the basis for our neck construction depending on the model any 2 of these 4 types of woods will be used which gives us the following combinations a table at the end of this chap ter describes the possibilities for each model p.8
- Neck woods p.8
- English 8 p.8
- It is a proven combination framus guitars that fall into the semi acoustic and full resonance categories benefit the most from a maple neck with a glued on tiger stripe ebony fingerboard combination the already full sounding guitars get an additional boost in attack and high frequencies that are necessary for a balanced sound picture the ebony fingerboard clearly underscores the tonal attributes and the high standard of these instruments p.9
- Framus pays also tribute to this tradition especially when it serves the purpose of enhancing the properties of the in strument this combination is found on guitars that need that special bite and high frequency cut through p.9
- English 9 p.9
- Although rosewood is included in the hardwood category it is less dense more porous and a tad softer than tiger stripe ebony the resulting tone is obviously warmer but never sounds sharp this combination underscores the naturally ho nest character of the framus guitars that have the additional pro denomination in their model names p.9
- A maple neck has a direct pithy open sound in short it sounds like a big bang reason enough to like it and reason enough to develop guitars that do just that framus is offering models with a one piece maple neck or a maple neck with a maple fingerboard the framus custom shop also offers the option of a guitar with a one piece neck among many other possibilities that will make your instrument stand out p.9
- Maple neck with tiger stripe ebony fingerboard p.9
- Maple neck with rosewood fingerboard p.9
- Maple neck with maple fingerboard one piece maple neck p.9
- Framus uses hand made genuine mother of pearl inlays on its guitars and they are installed with much care and detail aside from the standard inlays being used in their current models the framus custom shop offers a wide variety of ad ditional motifs functional or just plain nice this is one of the most popular options to create a very personal instrument for yourself there are also block inlays available if you want to have your name or initials engraved on the last fret more classic options are being offered as well like white or black dots the following table is a precise overview to see which model has what type of inlays or dots as a standard option p.10
- Fingerboard inlays dots p.10
- English 10 p.10
- Stain high polish finish sthp p.11
- Satin finish sf p.11
- Polished varnish p.11
- Natural oil finish nof p.11
- High polish finish hp p.11
- Finishes p.11
- Colored oil finish cof p.11
- Metal flake p.12
- Chrome tone ct p.12
- Airbrush graphic p.12
- Shellac p.12
- Sandblasted finish p.12
- English 13 p.13
- The story begins in 1978 in santa barbara california when seymour duncan founded his company with the same name and his ideas about electrical signal transformation into audible success started his early developed talent created an around the globe successful company that always meant to preserve one thing the spirit of a seymour duncan the worldwide famous first class pickups that bear his name are installed in all framus models with the exception of the az 10 and they are meant to fit each guitar according to its tonal characteristics and outfitted with diverse switching combinations the following table describes the pickup combination available in each standard framus model p.14
- Pickups hardware p.14
- Pickup configurations p.14
- Good wood is important as well as a solid construction and a sound design but this means nothing if it isn t comple mented with high quality components pickups are responsible for the sound of the instrument precision is an impor tant point that reflects quality too nut bridge construction and tuning machines are only going to last if they are built thoroughly and meticulously with high quality materials not for nothing are they responsible for good tuning framus uses the best components only from the best manufacturers and also its own which bear the framus label p.14
- English 14 p.14
- English 15 p.15
- Electric guitars have different demands when it comes to sound and playing techniques that is why framus offers not less than 10 different bridges and vibrato systems basically it s possible to outfit any guitar model with a different bridge of vibrato system than the one it comes with the framus custom shop will gladly inform about all the available options provided that there are certain limitations in terms of construction p.15
- Bridges and vibrato systems p.15
- Tune o matic with stop tailpiece height adjustable fixed bridge with adjustable saddles and separate stop tailpiece assembly 2 tune o matic bridge with trapeze tailpiece height adjustable fixed bridge with adjustable saddles and a floating trapeze tailpiece anchored to the butt end of the guitar 3 one piece framus bridge string through body fixed bridge with adjustable saddles and rear mounted string ferrules strings are put on through the back of the guitar also called a string thru bridge 4 framus vibrato by wilkinson 2 point system with knife edge principle and screwed on metal sustain block strings are put on from the back and through the sustain block 5 framus vintage vibrato 6 point system functions like framus vibrato by wilkinson 6 framus floyd rose licensed vibrato system 2 point system with knife edge principle and screwed on metal sustain block plus locking nut strings are put on from the top through the back of the saddles 7 original floyd rose vibrato system functions like p.16
- Here s a list of all the available options and thereafter a table with a model overview p.16
- English 16 p.16
- Tuning machines p.17
- English 17 p.17
- Tuning machines are an important component of the guitar and are not to be neglected framus is able to offer two ex clusive machine heads of its own all pro models as well as the monterrey come with smooth running oil based tu ning machines allow problem free use of a vibrato system the streetwalker and morrigan models have these machine heads plus a locking nut that comes with the floyd rose vibrato system all custom models as well as the ak 1974 the manhattan and the az 10 have framus locking tuners with this type of machine the strings are not wound anymore but fed through a hole at the machine head and locked with a tightening screw if done correctly the string will be in tune after about half a turn having less turns means less slippage guitars with locking tuners stay much better in tune especially after changing strings which also becomes a quicker and less time consuming procedure the framus cus tom shop also offers schaller and sperzel locking tuners on request p.17
- Security locks p.18
- Hardware colors p.18
- Strings p.20
- Neck joint p.20
- Construction p.20
- Accessories included items p.20
- English 21 p.21
- Truss rod p.22
- Volume push pull volume control pushed humbucker mode volume control pulled singlecoil mode both humbuckers are split tone p.23
- Pickup selector p.23
- English 23 p.23
- Diablo pro diablo custom controls p.23
- Diablo custom 7 string p.23
- Controls p.23
- Control elements p.23
- Volume push pull volume control pushed humbucker mode volume control pulled singlecoil mode humbucker is split tone p.23
- Volume push pull volume control pushed humbucker mode volume control pulled singlecoil mode humbucker is split tone p.24
- Spitfire pro spitfire custom controls p.24
- Pickup selector p.24
- English 24 p.24
- Diablo light scotch p.24
- Controls p.24
- Volume push pull volume control pushed humbucker mode volume control pulled singlecoil mode both humbuckers are split tone p.25
- Renegade pro renegade custom controls p.25
- Pickup selector p.25
- English 25 p.25
- Camarillo camarillo 7 string controls p.25
- Tennessee pro tennessee custom controls p.26
- Pickup selector p.26
- Panthera pro panthera custom panthera custom 7 string controls p.26
- English 26 p.26
- Volume tone p.26
- Volume tone p.27
- Pickup selector p.27
- Panthera studio pro panthera studio custom panthera studio custom 7 string controls p.27
- Monterey p.27
- Master volume blend in control between middle singlecoil and split neck pickup with push pull function pulled tone with push pull function to split bridge pickup pulled p.27
- Lead free switch p.27
- English 27 p.27
- Controls p.27
- 3 wegschalter p.27
- Volume p.28
- Streetwalker 7 string p.28
- Streetwalker 6 string p.28
- Pickup selector p.28
- English 28 p.28
- Controls p.28
- Volume with push pull function volume control pushed humbucker activated and neck singlecoil bypassed volume control pulled humbuckers are bypassed and neck singlecoil is activated regardless of selector position p.28
- Volume tone p.29
- Pickup selector p.29
- English 29 p.29
- Controls p.29
- Az 10 single pickup az 10 blonde az 10 bubinga az 10 makassar az 10 koa az 10 shellac p.29
- Ak 1974 p.29
- 6 way rotary switch p.29
- Volume treble bass p.30
- Volume tone p.30
- Pickup selector p.30
- Manhattan p.30
- English 30 p.30
- Controls p.30
- Az 10 dual pickup p.30
- 2 x volume one per pickup 2 x tone one per pickup p.31
- Volume tone p.31
- Pickup selector p.31
- Mayfield pro mayfield custom controls p.31
- Hollywood p.31
- English 31 p.31
- Controls p.31
- Volume tone p.32
- Volume 1 bass and 1 treble control stacked p.32
- Pickup selector p.32
- Morrigan pro p.32
- Morrigan custom p.32
- English 32 p.32
- Controls p.32
- Colored oil finish cof p.33
- Chrome tone finish ct p.33
- Body wood and finish maintenance p.33
- Shellac p.33
- Natural oil finish nof p.33
- Instrument care and maintenance p.33
- High polish finish hp p.33
- Truss rod p.34
- Neck wood care p.34
- Neck wood p.34
- Hardware cleaning p.34
- Fingerboard p.34
- String action p.35
- Pickup height p.35
- Intonation p.35
- The easy access electronics compartment p.36
- Machine heads p.36
- Framus vibrato by wilkinson p.36
- Bridge system setup p.36
- Tune o matic bridge with stop tailpiece or trapeze tailpiece p.37
- Framus vintage vibrato p.37
- One piece fixed bridge p.38
- Framus floyd rose vibrato p.38
- The original floyd rose vibrato works basically like a framus floyd rose system the main difference is in the way you put on the strings they are tightly locked at the saddle between the little insert block and the string lock screw to ac complish this the ball end of the string has to be cut p.39
- The bigsby vibrato is made of aluminum is mounted onto the body and comes with a string tension bar which avoids string noise when the vibrato is used the ball end of the string is placed on its corresponding axle pin the string ten sion bar has 3 different settings the string height adjustment is done at the tune o matic bridge with the two thumbs crews and the intonation is adjusted with the saddle screws the lateral positioning of the bridge can be changed with two side screws but first the locknuts have to be loosened and after the adjustment retightened p.39
- Original floyd rose vibrato p.39
- Original bigsby vibrato b7 b500 p.39
- English 39 p.39
- Height adjustable and length compensating ebony bridge p.40
- Glossar p.41
- English 42 p.42
- Support service sales www framus de p.43
- Important technical information contained herein can be subject to change without notice p.43
- General specifications p.43
- English 43 p.43
- Wood denominations p.43
Похожие устройства
-
FRAMUS 171683U315BPMAHM3LРуководство по эксплуатации -
FRAMUS 178686T115CPMAHO2FРуководство по эксплуатации
-
FRAMUS 1136831314CPMFTO2LРуководство по эксплуатации
-
FRAMUS 1706815315CPASHAFLРуководство по эксплуатации
-
FRAMUS 1756839015CPMAHM2FРуководство по эксплуатации
-
FRAMUS 1126875315CPASHA6LРуководство по эксплуатации
-
FRAMUS 1036860115CPMMPOTFРуководство по эксплуатации
-
FRAMUS 1136866514CPMFTO2LРуководство по эксплуатации
-
FRAMUS 175683T915CPMAHM2FРуководство по эксплуатации
-
FRAMUS 1756835115CPMAHM2FРуководство по эксплуатации
-
FRAMUS 1786865315CPMAHO2FРуководство по эксплуатации
-
FRAMUS 1756830315CPMAHM2FРуководство по эксплуатации