Artel A65LU8500 [35/53] Other information

Artel A55LU8500 [35/53] Other information
OTHER INFORMATION
Troubleshooting issues
Most of the problems you encounter on your TV can be
fixed by checking out the following Troubleshooting list.
No image, no sound
1. Check if the fuse has blown or the circuit breaker has
tripped.
2. Connect another electrical device to the wall outlet
to make sure that the wall outlet is working properly or
that the mains power is connected.
3. The plug has poor contact with the outlet.
4. Check for a signal source.
No color available
1. Change the color system.
2. Adjust the saturation.
3. Try a different channel. Try using black-and-white
programs.
The remote control does not work
1. You may need to replace the batteries.
2. The batteries are not installed correctly.
(see polarity)
3. The TV's main power supply is not connected.
No image, sound is normal
1. Adjust the brightness and contrast if necessary.
2. The TV broadcast may have failed.
Normal picture, no sound
1. Click Vol + button to increase the volume.
2. If the volume is turned off, click mute to restore the
sound.
3. Change the sound system.
4. There may be a TV broadcast failure with no sound.
Disordered ripples in the image
This is usually caused by local interference, such as cars,
daytime running lights, and hair dryers. Adjust the
antenna to minimize interference.
Snow spots and interference
If the antenna is located in a peripheral area of the TV
signal where the signal is weak, the image may be
damaged by dots. When the signal is very weak, you
may need to install a special antenna to improve
reception.
1.Adjust the position and orientation of the indoor /
outdoor antenna.
2.Check the antenna connection.
3.Fine-tune the channel.
Try a different channel. The TV broadcast may fail
Ignition
Black spots or horizontal stripes appear, or the image
shakes or shifts. This is usually caused by interference
from the car's ignition system, neon lights, electric
drills, or other electrical appliances.
Stray highlights
Stray glare is caused by receiving a television signal in
two ways. One of them is a direct path, the other is
receiving a reflected signal from tall buildings, hills, or
other objects. Changing the direction or position of the
antenna can improve reception.
Radio frequency interference
This interference results in moving ripples or diagonal
stripes, and in some cases, loss of contrast in the image.
Find out and remove the source of radio interference.
Note: Еif the TV settings are broken, please contact
the after-sales service Department to resolve the
problem.
TV installation methods
Fasten the double support base to the appliance with
the screws, and the TV installation is complete.
Note. The illustrations below are for reference only
and may differ from the actual appearance of a
particular product.
SAFE DISPOSAL
Your device is designed and
manufactured from high-quality materials
and components that can be recycled and
reused.
Check out the local system for separate
collection of electrical and electronic
goods. Follow the local rules!

Содержание

Похожие устройства

Скачать
Случайные обсуждения