Taurus Sliding Spacex 3000 NS [7/40] Defects and repairs
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Taurus Sliding Spacex 3000 NS [7/40] Defects and repairs

Taurus Sliding Spacex 3000 NS [7/40] Defects and repairs
screen ashes and goes with the 3 sound of
bees. Fig. 5
- Two minutes later, the buzzer rang three times,
indicating that the cleaning was complete.
AUTO SHUT OFF
- When the iron is stationary for more than 10
minutes, the iron goes out of power mode
- The powero󰀨 sign ashed on the display,
accompanied by six buzzing sounds
- Press the steam switch to restore the power
- Irons will not be cut o󰀨 during steam discharge
- If you need stop the process switch o󰀨 the item
ANTI DRIP
- This iron is equipped with a drip stop function:
the iron automatically stops steaming when the
temperature is too low to prevent water from
dripping out of the soleplate.
ANHYDROUS DETECTION (NO WATER
DETECTION AFTER 30 SECONDS)
- In the course of working, if there is no water in
the water tank, the pump will automatically stop
working to protect the life of the pump
DEFECTS AND REPAIRS
- Do not attempt to replace a defective mains
lead .The appliance has to be returned to an
authorized service centre for repair.
CORD STORAGE
- Follow Fig. 6
FAULTSREASONS AND SOLUTIONS
IRON EMITS AN ODOR OR SMOKE
- Iron gives o󰀨 an odor when turned on for the
rst time. Oils used during manufacture need
to be burnt o󰀨 allow ten minutes for odor to
disappear.
IRON DOES NOT HEAT
- The iron should be plugged into a 230 Volt ,
Whether the power switch is turned on
IRON DOES NOT STEAM
- The water tank many be empty. Turn o󰀨 the
steam regulator and add water. Allow the iron
to heat, and then set the turn on to the steam
setting.
IRON IS LEAKING
- The temperature setting is too low to produce
steam. Shot of steam used too much, allow iron
to re-heat.

Содержание

Похожие устройства

Скачать