INGCO CSLI1651 [7/12] Adjusting depth of cut

Adjusting depth of cut

CAUTION:

• After adjusting the depth of cut, always tighten the

lever securely.

Loosen the lever on the side of the rear handle and

move the base up or down. At the desired depth of cut,

secure the base by tightening the lever.

For cleaner, safer cuts, set cut depth so that no more

than one blade tooth projects below workpiece. Using

proper cut depth helps to reduce potential for dangerous

KICKBACKS which can cause personal injury.

Bevel cutting

Loosen the lever on the bebel scale plate on the front

base. Set for the desired angle (0° - 50°) by tilting

accordingly, then tighten the lever securely.

Sighting

For straight cuts, align the A position on the front of the

base with your cutting line. For 45° bevel cuts, align the

B position with it.

Switch action

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger

actuates properly and returns to the "OFF"

position when released.

• Do not pull the switch trigger hard without pressing

the lock-off lever. This can cause switch breakage.

To prevent the switch trigger from being accidentally

pulled, a lock-off lever is provided. To start the tool,

press the lock-off lever and pull the switch trigger.

Release the switch trigger to stop.

WARNING:

• For your safety, this tool is equipped with lock-off

lever which prevents the tool from unintended

1. Lock-off lever

2. Switch trigger

1. Base

2. Cutting line

1. Lever

7|English