Karcher LM 530/36 Bp [21/256] Rechargeable battery pack

Karcher LM 530/36 Bp [21/256] Rechargeable battery pack
English 21
1 Battery pack release
2 Charge indicator
3 Type plate
4 Push Assist lever
5 ON/OFF lever
6 Slider speed control
7 Starter button
8 Motor control cable
9 Telescopic handle
10 Handle lock
11 Grass bag
12 Quick-release catch
13 Cutting height adjustment lever
14 Cutting height display
15 Fall protection
16 Mulch plug
17 *Side ejector
18 Safety key
19 *Battery Pack Battery Power+ 36V (2x)
20 *Quick Charger Battery Power+ 36V
* optional
Rechargeable battery pack
The device can be operated with two 36 V Kärcher Bat-
tery Power+ battery packs.
Initial startup
Adjusting the handle
1. Fold over the telescopic handle.
a Pull out both quick-release catches.
Illustration B
b Turn the quick-release catches.
The quick-release catches are unlocked.
c Fold over the telescopic handle.
d Lock the quick-release catches.
2. Extend the telescopic handle.
a Unlock the handle locks.
Illustration C
b Pull the telescopic handle out completely.
c Lock the handle locks.
Note
The device only functions when the telescopic handle
has been completely pulled out and the handle locks are
locked.
3. Adjust the inclination angle of the handle if neces-
sary.
a Pull out both quick-release catches.
Illustration B
b Turn the quick-release catches.
The quick-release catches are unlocked.
c Choose the inclination angle.
d Lock the quick-release catches.
Attaching the mulch plug
The mulch plug is used when the mown grass is to re-
main on the lawn.
1. Pull up the handle of the mulch plug.
Illustration E
2. Install the mulch plug in the ejection chute.
Illustration F
3. Pull down the handle of the mulch plug.
The mulch plug is locked in the device.
Mount the grass bag
The grass bag is used when the mown grass is to be
collected for disposal.
1. Remove the mulch plug if necessary.
a Pull up the handle of the mulch plug.
Illustration G
The mulch plug is unlocked.
b Remove the mulch plug from the ejection chute
2. Hook the grass bag to the ejection chute.
Illustration H
Mounting the side ejector
The side ejector is used when the grass clippings are to
be ejected sideways.
1. Remove the mulch plug if necessary.
a Pull up the handle of the mulch plug.
Illustration G
The mulch plug is unlocked.
b Remove the mulch plug from the ejection chute
2. Hook in the side ejector on the ejection chute.
Illustration I
Mount the battery pack
1. Push the battery pack into the mounting in the de-
vice until it audibly latches into place.
Illustration J
Insert the security key
1. Use the security key.
Illustration K
The mark on the security key indicates which battery
pack is used during operation.
Operation
General information on handling the
lawnmower
The run time of the battery depends on several factors:
The condition, length and density of the grass
The cutting height setting
Maximum surface performance depending on the state
of the grass: approx. 2500 m
2
.
The results of the mowing process can be optimised as
follows:
Cut at a maximum of one third of the grass height.
When mowing tall grass, reduce the speed at which
the device is pushed or moves forward when the
push-assist function is activated.
Note
Do not mow wet grass. Wet grass sticks to the under-
side of the lawnmower and prevents correct collection of
the grass in the grass bag or ejection of the grass.
Mowing lawns
WARNING
Lifting or tipping the lawnmower during operation
Incision injuries
The blade of the lawnmower rotates approximately par-
allel to the ground over which it moves. Take care to en-
sure that all four wheels touch the ground when
mowing.

Содержание

Скачать