Home
Главная
Brayer
Шнековые Соковыжималки
BR1703
Руководство по эксплуатации Страница: 10

Brayer BR1703 Руководство по эксплуатации онлайн [10/44] 794927

the Auger (4). Having dealt with it, reinstall the Feeding

Chute/Lid (2-3) to continue using the Juicer.

• Once the juice container (13) has lled up, turn the

Juicer o󰀨 and pour the juice into a suitable container,

place the juice container (13) under the juice spout (9).

Note: slowly pour juice out of the Juice Container (13) -

the froth separator will remove any foam.

• Remove the froth separator, wash the Juice Container

(13), reinstall the froth separator (g. 8).

Note: for your convenience, place an appropriately-

sized bag into the pulp container (14) to remove the pulp

together with the bag.

• Keep the juice container (14) full, turn o󰀨 the juicer and

remove the juice from the container (14).

• Once you nish using the Juicer, turn it o󰀨 by setting

the power (11) to «OFF», and unplug it from the mains.

OVERHEATING PROTECTION

• Exceeding the operating temperature will trigger the

overheating protection and the Juicer will turn o󰀨.

• Should the Juicer turn o󰀨 on its own, set the power (11)

to «OFF» and unplug it from the mains.

• Depending on the room temperature, the electric motor

can take from 20 to 50 minutes to cool down, once it

has cooled down, plug it into the mains and turn the

Juicer on.

• Should the Juicer fail to turn on, wait for some time, if

nothing changes this might indicate another defect. In

this case, please, contact an authorized service center.

• Do not exceed the recommended operation time.

CLEANING AND CARE

• Perform cleaning of the Juicer after each use.

• Turn o󰀨 the Juicer and unplug it from the mains

before cleaning.

• Remove the pusher (1) from the feeding chute (2).

• Turn the feeding chute/lid (2-3) counterclockwise and

remove them.

• Remove the Auger (4), Mesh Filter (5), and Separator

(6) from the Juice Bowl (7).

• Rotate the Juice Bowl (7) in the counter-clockwise

direction and remove it from the Motor Unit (10).

• Wash the removed parts (2-3, 4, 5, 6, 7), the juice

cup (13), the pulp container (14) with warm water and

a neutral detergent, then rinse and dry.

• For your convenience, remove the froth separator

from the Juice Container (13), wash the Juice

Container (13), and reinstall the froth separator back

(g. 8).

• Extract the Silicone Seal (12), located inside the

Juice Bowl (7), clean and wash the pulp canal.

• Reinstall the Silicone Seal (12) back inside the Juice

Bowl (7) (g. 1).

• Use the brush (15) to clean the Mesh Filter (5) and

other hard-to-reach places.

• Do not wash the removable parts of the Juicer in a

dishwasher.

Brayer BR1703 Руководство по эксплуатации онлайн [10/44] 794927

Содержание

Похожие устройства