Home
Главная
Brayer
Шнековые Соковыжималки
BR1703
Руководство по эксплуатации Страница: 9

Brayer BR1703 Руководство по эксплуатации онлайн [9/44] 794927

• Do not use your ngers or any utensil other than

the included plunger (1) while inserting fruits and

vegetables into the feeding chute (2).

• Regularly check the Mesh Filter (5) for clogging with

pulp, if necessary switch the juice extractor o󰀨 by

setting the power switch (11) to the «OFF» position,

and disconnect the power plug from the electrical outlet.

Notes:

- use the «R» function of rotating the Auger (4) in the

reverse direction before disassembling the Juicer, for

which purpose set the Power Switch (11) to «R» and

hold it down for 1-2 seconds. Doing so should ease

the removal of the Auger;

- turn o󰀨 the Juicer before using the reverse function

of rotating the Auger (4) in the reverse direction, for

which purpose set the Power Switch (11) to «OFF»,

wait for the Auger (4) to stop rotating completely,

after which set the Power Switch (11) to «R».

• Rotate the Feeding Chute/Lid (2-3) counter-clockwise

to remove it, extract the Auger (4), remove the Mesh

Filter (5) and the Separator (6), wash the removed

parts (2-3, 4, 5, 6), rinse them, and reinstall back in the

reverser order (see the Juicer Assembly section), plug

the appliance into the mains, and turn on the Juicer to

be able to continue using it.

Notes:

- for best results, having extracted the Silicone Seal

(12), remove and wash the Juice Bowl (8) and the

pulp canal as well;

- before installing the Juice Bowl (7), make sure that

the Silicone Seal (12) has been reinstalled (g. 1).

• If you want to juice another fruit or vegetable without

mixing the juice with the previous fruit or vegetable,

close the Juice Spout (9), pour 1 or 2 glasses of

water into the Feeding Chute, turn on the Juicer and

leave it on for a while, open the cover of the juice

spout - the liquid will be purged into the container,

leaving the Juice Bowl with less remnants of the

previous fruit or vegetable. Repeat the preliminary

washing procedure, if necessary.

• To mix di󰀨erent juices while the juice extractor

is running you can close the juice spout (9) lid

and continue pressing juice from another fruit or

vegetable, then open the spout (9) lid and pour the

juice into the cup (13).

• Close the spout (9) lid when pouring the juice from

the cup (13) or when the juice extractor operation is

nished.

• If the auger (4) slows down during the juice extractor

operation, immediately switch the juice extractor

o󰀨 by setting the power switch (11) to the «OFF»

position, after the auger (4) stops rotating, move the

power switch (11) to the «R» position and hold it, the

auger (4) reverse rotation function will be activated.

Let go of the Power Switch (11) after a few seconds,

unplug the device from the mains, rotate the Feeding

Chute/Lid (2-3) counter-clockwise, remove it, and

attend to the cause of slowing down the rotation of

Brayer BR1703 Руководство по эксплуатации онлайн [9/44] 794927

Содержание

Похожие устройства