DECROSS DC93 Dark Green Twin 2шт [16/57] Automatic power saving

Scanning Channels

To Start Scanning:

1. Briey press the button to start scanning. SCAN icon will appear in the display. The device will

stop scrolling and receiving when matched channel and sub codes detected.

2. After the end of transmission, press the PTT button within 5 seconds to respond. The device will

resume scanning after end of any received activity.

3. If you press PTT button when the device is scrolling, the transmission will be on the 'home channel'.

4. Press button to exit scanning feature.

Notes:

If the device stops on an unintended/undesired transmission, press or button to resume

scan OR temporarily remove that channel from the scan list by pressing and holding or for 3

seconds. Press to exit and re-enter scan mode to restore removed channels to the scan list.

LED Lamp

Press the button to turn ON/OFF the lamp.

Automatic Power Saving

This feature is enabled by default to enhance battery life.

Emergency SOS Mode

User can use this feature to emit SOS signal. To enter emergency SOS mode:

1. Press and hold the SOS button for 3 seconds. The RED LED light will be activated.

2. Press the button again to deactivate.

Water Activated LED

Once the devices are dropped into water, white LED will be activated automatically to ease user to

locate the devices in dark environment. After retrieve the devices, press any button to deactivate

except button. button will overwrite and activate LAMP feature.

Note: Radio oats with designated 1200mAh NiMH batteries. It may not oat with other batteries.