Lydsto H4 [10/17] Cleaning the floor brush roller

1.Turn the HEPA ﬁlter face up. 2.Place the sponge and HEPA

components clockwise into the

slot of the steel ﬁlter.

3 Align the air ﬁlter component with the Main Machine according to the position shown in

the ﬁgure, and install the air ﬁlter in place by rotating it clockwise.

Installing the Steel Filter Component

Cleaning the Floor Brush Roller

Please follow the instructions below to check and clean periodically to keep its

performance. Before removing the roller, make sure that the brush head is separated

from the main machine to avoid personal injury caused by Accidentally starting the

machine.

Attention:

Roller brush must be removed and cleaned separately. Do not wash with water,

except that electric parts are contained in the fuselage of the brush and ground

brush and bearings are contained in the roller of the brush.