iVigo EPK4570P10 White [17/172] Access to the settings menu

Access to the Settings Menu

In order to access to the settings menu, use the On/O switch on the side to turn o the device. Press

and hold the power button while switching on the unit from the side. To turn o the device, please

use the power switch on the side. To switch on, press and hold the power button . The device display

shows the rst option available in the menu. You can switch between the options with the and

buttons. To see and edit the details of an option that appears on the screen, press and hold the power

button

for 3 seconds. To save the changes, press and hold the power button for 3 seconds. To exit

without saving, turn o and back on the device via the On/O switch

on the side.

PtyP => Program Settings (daily/weekly)

tSEt => Setting Time and Day

hSEt => Weekly Program Setting

ASEt => Adaptive Start Parameters

oPEn => Heat Loss Detection Parameters (Windows, doors, etc. left

open)

AnFr => Anti-Frost Setting

uEr => Software Version Monitoring

CodE => Key Code

CCod => Erasing the Key Code

CntC => Temperature Calibration

CLdr => Display Brightness Adjustment

Program Type Settings

There are two program types: daily and weekly. Only one program type can be set at any time. The daily

program is used for turning on/o the device at the end of a preset period. The weekly program is used

for setting the temperature level at a given time. The unit is set to daily programming by default. To

change the program type, go to the Settings menu. Proceed with the and buttons until “PtyP”

appears on the screen. Press and hold the the power button for 3 seconds Switch between the daily

(“d_Pr”) and weekly (“h_Pr”) options with and buttons. To choose a program, press and hold

the power button for

3 seconds when it appears on the screen (“d_Pr” for daily, “h_Pr” for weekly). On the display appears

“donE” and the device goes back to its regular operation. This notication informs that the setting is

completed and saved.

Daily Program

The device has the daily program type activated by default unless changed. The daily program enables

a power-o delay if the device is on, and a power-on delay if it is o. The maximum power-on delay

allowed is 48 hours, while the maximum power-o delay is 8 hours. To switch to this mode, go to the

Settings menu, select “PtyP” and then “d_Pr”. (cf. Program Settings). When the device is on, press and

hold the time button and set the hours of delay. For instance, if the power-o delay is set to 3 hours, the

display reads ”03of”.