iVigo EPK4550P07 White [18/172] Open window detection windows doors etc left open

18

To activate the automatic power-on function, turn o the device by pressing the power button ( until

you “oFF” appears on the screen. Pressing and holding the time button

set how many hours later

you want the device to be turned on. For instance, if the power-on delay is set to 8 hours, the display

reads ”08on”.

Weekly Program

There are two programs available, one for the week and one for the weekend. In this mode, the device

can be set to a temperature level at a specic time. You can determine 12 dierent times, namely 6 for

programing weekdays (day 1-5). P07-P12 are used for programing weekend days (day 6-7). To set the

weekly program, go to the Settings menu and select “hSEt”. The display reads the weekly program’s rst

entry (P01) and will allow you to set time, days and desired temperature for the given time period. Using

the plus and minus buttons, set the desired temperature level for selected time period by using plus

the display prompts “donE”. The settings are saved and the device goes back to its regular operation.

For a proper functioning of the weekly program, make sure that the actual on-screen time is accurate.

Typical day order set up:

Setting Time

In order to set the time, go to the Settings menu and select “tSet”. The next display shows the hour in

a blinking state. Set the hour with the plus and minus buttons. Press the time button (

) again and

the minute section starts blinking. Proceed once again with the plus and minus buttons. Press the time

button (

An open door or window drops the ambient temperature dramatically even if the heater is on. With a door, window,

etc. open, turn o the heater to control electricity usage and avoid energy waste. Once this feature is activated, the

end of the waiting period, the device goes back to its normal operations. The level of temperature fall to

activate the temperature drop detection feature can be set to any value from 1.0