Navitel R900 4K [20/66] Installation

Navitel R900 4K [20/66] Installation
EN
NAVITEL R900 4K | 19
Installation
1. Put the microSD card into the DVR. Use a high-speed SD card (Class U3 or above); capacity should be within 8-256 GB.
To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD-card during DVR operation.
Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card in Menu mode select Format
SD-card and conrm it.
2. Secure the device on the windshield with the holder.
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the DVR (Type-C).
5. Adjust the camera position.
6. Turn the power on; check whether the device is installed correctly. If the device is installed correctly, it will start up and begin recording.
Precautions
The built-in supercapasitor is only designed to properly turn o the device when the power is turned o and save the last recorded le; For the full operation of
the device in any of the modes, a constant power connection is required.
Permissible ambient temperature in operating mode: -10 to +60 °С. Storage temperature: -20 to +80 °С. Relative humidity: 5% to 90% without condensation
(25 °С).
Put the device away from re sources to avoid explosion or re.
Do not expose the device to physical impacts.
Avoid contacting the device with sources of electromagnetic radiation.
Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn o the device before cleaning.
Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
Do not disassemble or repair device by yourself. In case of device failure, contact the service center.
Use only the original charger adapter. Using another adapter may negatively aect the device’s work. Use accessories only approved by manufacturer.

Содержание

Похожие устройства