Beon BN-3402 [8/16] Instruction manual
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Beon BN-3402 [8/16] Instruction manual

Beon BN-3402 [8/16] Instruction manual
EN
Dear customer!
We thank you for the choice made in favor of the home appliances brand BEON.
8 INSTRUCTION MANUAL
SAFETY INSTRUCTIONS AND WARNINGS
The device is intended for use in everyday life, indoors at normal temperature and humidity. It is
forbidden to use the device for industrial or commercial purposes.
Remove the appliance from its packaging and make sure that it is intact and undamaged. Keep
packaging materials away from children.
Before connecting the appliance to the power supply, make sure that the mains voltage and
frequency correspond to those indicated on the product label. Connect the appliance to a
grounded wall outlet. Only connect the appliance to an AC power source.
For additional protection against electric shock, it is advisable to install a protective shutdown
device (RCD) in the network that supplies the device. Ask a qualified professional for advice.
Inspect the appliance every time before turning it on. In the presence of damage to the device,
the power cord, in any case, do not plug the device into an outlet.
Do not use a faulty appliance, with a damaged power cord or plug. If the power cord is damaged,
contact the manufacturer's authorized service center to replace it.
Do not connect the appliance to a timer or other device that automatically controls the switching
on / off of the appliance.
It is also forbidden to use accessories that are not recommended by the manufacturer.
Do not disassemble, modify, or attempt to repair the appliance yourself.
To avoid electric shock, do not use the appliance in a room with high humidity (such as a
bathroom) or operate the appliance with wet hands.
Do not allow the power cord to hang over the edge of the table or come into contact with hot
surfaces or sharp objects.
It is forbidden to move the thermos pot that is being heated.
When disconnecting the appliance from the power supply, do not pull the power cord, but only
use the power plug.
Handle the appliance carefully and do not allow it to fall over. Place the thermopot on a flat,
stable, heat-resistant surface. If you drop the thermopot, hot water can spill out through the
spout or steam vent, causing a burn.
Do not install the thermopot near walls or furniture. Steam and heat can cause them to discolor
and deform. The minimum distance from the fence to the walls or furniture is 30 cm.
Do not place the thermopot near strong heat sources (such as an oven).
It is forbidden to leave flammable materials near the thermopot. Do not use force when closing
the lid.
Close the lid tightly. Hot water may spill out through the loosely closed lid, causing a burn.
It is forbidden to pour water into the thermopot above the maximum mark.
Do not leave the appliance running unattended.
If you do not plan to use the thermopot for a long time, disconnect it from the power supply and
wait for it to cool down. After that, drain the water and clean the device.
Do not allow children to use the thermopot without your supervision. Do not allow children to
play with the appliance. Install the thermopot in a place where it cannot be reached by small
children.
It is forbidden to load the thermopot or the power cord into water or to wash them under the
tap. Make sure that no moisture gets inside the housing with electrical components.

Содержание

Похожие устройства

Скачать