Beon Bеоn BN-819 [9/12] Instruction manual

Beon Bеоn BN-819 [9/12] Instruction manual
9 INSTRUCTION MANUAL
Assembly of a vacuum cleaner
Connect the flexible hose supplied with the hose connection hole
on the vacuum cleaner housing; press the hose slightly towards
the housing until you hear a characteristic click indicating that the
hose is fixed. To remove the hose, press the retainer and pull the
hose towards you.
Connect the steel telescopic tube to the vacuum cleaner hose. Press the clamp on the pipe and
pull it to the desired length. Release the latch, the tube will be fixed.
Attach one of the attachments supplied in the kit.
NOTE:
There is a manual air flow regulator on the handle of the flexible hose, which allows to reduce
the suction force for a short time (for example, when cleaning curtains).
USING A VACUUM CLEANER
Assemble the vacuum cleaner as described above. Select the nozzle according to the intended
coating.
Pull the power cord to the desired length without exceeding the red mark. Connect the vacuum
cleaner to the mains with the appropriate parameters. Make sure that the power cable does not
hang over the sharp edges of the furniture.
Press the power key and the vacuum cleaner will start working. To temporarily reduce the
suction power, use the air flow regulator on the flexible hose.
For ease of movement, the vacuum cleaner is equipped with two wheels and a rotary roller; it is
enough to pull the flexible hose without exerting additional effort.
There is a handle in the upper part of the vacuum cleaner housing for carrying the vacuum
cleaner.
After the end of operation of the device, disconnect it from the power supply. Remove the
nozzles and the flexible hose. Press the automatic winding key to hide the cord.
NOTE:
During operation, some parts of the housing may heat up, which is not a malfunction.
The device is equipped with a thermostat that prevents overheating. If the vacuum cleaner
turns off spontaneously during prolonged operation, it is necessary to disconnect the device
from the mains and let it cool down for an hour. After cooling down, the vacuum cleaner can
be used normally.
CARE AND CLEANING OF THE VACUUM CLEANER
Cleaning the dust collection container
Disconnect the device from the mains. Disconnect the flexible hose from the vacuum cleaner
housing by pressing the clamps on the side of the hose.

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

Нера фильтр моющийся или нет?
11 месяцев назад