![And MC-10K [28/66] 2 details of the function table](/img/pdf.png)
And MC-10K [28/66] 2 details of the function table
![And MC-30K [28/66] 2 details of the function table](/views2/1103003/page28/bg1c.png)
26
9-2. Details of the Function Table
Class Item and Parameter Description
0
Fast response, sensitive value
FAST
1
MID.
Cond
Condition
2
Slow response, stable value
SLOW
Can be changed by response
adjustment. With "
Hold 1
", sets the
averaging time.
0
Stable when within
±
1 digit
1
5t-b
Stability band width
2
Stable when within
±
3 digits
The stabilization indicator illuminates
with the display fluctuation within the
range. With "
Hold 1
", sets the stable
range.
0
OFF
Hold
Hold function
1
ON
Holds the display when stable in
animal mode. With "
Hold 1
",
ANIMAL
turns on.
0
OFF
1
Normal
2
Strong
trc
Zero tracking
3
Very strong
Keeps zero display by tracking zero
drift.
0
5 times/second
5pd
Display refresh rate
1
10 times/second
Period to refresh the display
0
Point (.)
pnt
Decimal point
1
Comma (,)
Decimal point format
0
OFF
p-on
Auto display-ON
1
ON
Turns on the weighing mode display
when the AC adapter is connected.
0
OFF
poff
Auto display-OFF
1
ON (10 minutes)
Turns off the display after 10
minutes of inactivity.
0
OFF
g5i
Capacity indicator
1
ON
Capacity indicator.
Zero: 0%
Maximum capacity: 100%
0
OFF
add
Accumulation function
1
ON
Displays and outputs the total value
of the weighing data.
0
Does not display
rng
Display at start
1
Displays
Select whether or not to display the
smallest displayable weighing value
at weighing start.
0
Not used
f1l
Filter
1
Used (when the balance is used as a mass comparator)
0
Sets the display to zero.
p-tr
Zero upon power-on
1
Does not set the display to zero. Displays the previous value.
With this setting, do not perform re-zero operations frequently.
Refer to“Zero upon power-on” on page 30.
0
Performs zero and span calibration
ba5fnc
Environment
Display
5pn
Span calibration
1
Performs span calibration only.
Span calibration using the internal mass is possible with a tare on
the weighing pan. Refer to “Span calibration” on page 30.
Cl adj
Clock
Refer to the GX-K manual “10-7. Clock and Calendar Function"
Confirms and sets the time and
date. The time and date are added
to the output data.
0
No comparison
1
Comparison, excluding "near zero" when stable value or overloaded
2
Comparison, including "near zero" when stable value or overloaded
3
Continuous comparison, excluding "near zero"
Cp
Comparator mode
4
Continuous comparison, including "near zero"
0
Set the upper lower limit value
Select
Cp Hi
or
Cp lo
.
Cp in
Data input method
1
Set the reference value
Select
Cp ref
or
Cp lmt
.
0
Not added
Cp fnc
Comparator
Cp-r
Comparison results
1
Added
Select whether or not to add the
comparison results to the output
data.
:
Factory settings. Digit is a unit of minimum weighing value.
Содержание
- Mc 10k mc 30k 1
- This manual and marks 2
- Contents 3
- 1 about this manual 5
- 2 features 5
- Introduction 5
- 3 1 compliance with fcc rules 6
- 3 2 compliance with emc directives 6
- 3 compliance 6
- Unpacking and installing the balance 7
- Auto centering pan ax mc10k 30kpan installation procedure 8
- 2 installing the balance 9
- 1 before use 10
- Precautions 10
- 2 during use 11
- 3 after use 11
- 4 power supply 12
- Display 13
- Display symbols and key operation 13
- Key operations 13
- 1 selecting the weighing units modes 14
- 2 1 when using as a mass comparator 14
- 2 basic weighing 14
- Weighing 14
- 2 2 when building into a system 15
- 1 weighing speed adjustment 16
- Weighing speed adjustment self check function 16
- 2 self check function with response adjustment 17
- 1 calibration group 18
- Calibration 18
- Caution 18
- 2 automatic self calibration 19
- Automatic self calibration due to changes in temperature 19
- Caution 19
- Caution on using an external weight 19
- Display 19
- 3 one touch calibration 20
- About the internal mass 20
- Calibration using the internal mass 20
- 4 calibration using an external weight 21
- When the mc 10k is used 21
- 5 calibration test using an external weight 22
- When the mc 10k is used 22
- 6 correcting the internal mass value 23
- 1 permit or inhibit 25
- Automatic self calibration 25
- Calibration due to changes in temperature 25
- Calibration using an external weight 25
- Calibration using the internal mass one touch calibration 25
- Function switch and initialization 25
- Function table 25
- Internal mass correction 25
- 2 initializing the balance 26
- 1 1 structure and sequence of the function table 27
- 1 2 display and operation keys 27
- Example 27
- Function table 27
- 2 details of the function table 28
- Auto display off 28
- Auto display on 28
- Capacity indicator 28
- Class item and parameter description 28
- Comparator 28
- Comparator mode 28
- Comparison results 28
- Condition 28
- Data input method 28
- Decimal point 28
- Display at start 28
- Display refresh rate 28
- Environment display 28
- Factory settings digit is a unit of minimum weighing value 28
- Hold function 28
- Stability band width 28
- Zero tracking 28
- Auto print polarity 29
- Class item and parameter description 29
- Comparator 29
- Data memory 29
- Data output 29
- Data output mode 29
- Factory settings digit is a unit of minimum weighing value 29
- Hi buzzer 29
- Interval time 29
- Lo buzzer 29
- Lower limit 29
- Ok buzzer 29
- Reference value 29
- Tolerance 29
- Upper limit 29
- Ak error code 30
- Auto feed 30
- Baud rate 30
- Class item and parameter description 30
- Cts rts control 30
- Data bit parity bit 30
- Data format 30
- Data number output 30
- Data output 30
- Data output pause 30
- Factory settings digit is a unit of minimum weighing value 30
- Glp output 30
- Id number output 30
- Programmable unit multi unit 30
- Serial interface 30
- Terminator 30
- Time date output 30
- Timeout 30
- Zero after output 30
- Averaging range for the first moving average 31
- Averaging range for the second moving average 31
- Averaging time for the first moving average 31
- Averaging time for the second moving average 31
- Class item and parameter description 31
- Extended function 31
- Factory settings digit is a unit of minimum weighing value caution 31
- Id number setting 31
- The balance may not transmit the data completely at the specified refresh rate depending on the baud rate or data added to the weighing data such as time date and id number 31
- 3 description of the class environment display 32
- Condition cond 32
- Span calibration 5pn 32
- Stability band width 5t b 32
- Zero upon power on p tr 32
- 4 sdescription of the item data output mode 33
- Auto print modes a and b 33
- Key mode 33
- Stream mode 33
- 5 description of tte item data format 34
- A d standard format 5if type 0 34
- Dp dump print format 5if type 1 34
- Interval memory mode 34
- Stable header counting mode 34
- Stable header unstable header overload header 34
- Stable header unstable header stable header counting mode 34
- Terminator header data unit 34
- Unit data header terminator 34
- Csv format 5if type 5 35
- Data terminator 35
- Data unit terminator 35
- Header unit terminator data 35
- Kf format 5if type 2 35
- Mt format 5if type 3 35
- Nu numerical format 5if type 4 35
- Stable header unstable header overload header 35
- Stable value unstable value 35
- 5 1 description of the data format added to the weighing data 36
- Comparison results 36
- Data number dout d no 1 36
- Date dout 5 td 2 or 3 36
- Id number dout 5 id 1 36
- Tare value 36
- Time dout 5 td 1 or 3 36
- 6 data format examples 37
- A d dp kf mt nu 37
- A d nu 37
- G g g g 37
- Negative error 37
- Overload 37
- Positive error 37
- Space ascii 20h carriage return ascii 0dh line feed ascii 0ah 37
- Stable 37
- Unstable 37
- 1 setting the id number 38
- Id number and glp report 38
- 2 glp report 39
- Calibration report using the internal mass 39
- Calibration report using an external weight 40
- Calibration test report using an external weight 40
- Operation 41
- Title block and end block 41
- 1 rs 232c and external contact input 42
- D sub 25 pin assignments 42
- D sub 25 pin numbers 42
- Rs 232c 42
- Standard input output interface 42
- External contact input 43
- Option 43
- Rs 232c terminals 43
- 2 1 connection to the ad 8121b printer 44
- 2 connection to peripheral equipment 44
- 2 2 connection to a computer and the use of winct 45
- Using the winct software the balance can do the following 45
- Using windows communication tools software winct 45
- 1 command list 46
- Commands 46
- 2 acknowledge code and error codes 47
- 3 control using cts and rts 48
- 4 settings related to rs 232c 48
- Command completed 48
- Command received 48
- In process 48
- R command 48
- Weighing mode 48
- Zero display 48
- Extended function 49
- The mc series balance has several extended functions equipped for special applications or to troubleshoot when using the standard functions 49
- When the filter f1l is set to 0 extra items are available as shown below 49
- 1 1 averaging range 50
- And averaging time 50
- Description of averaging range and averaging time 50
- 1 2 filter depending on differences in the amount to deliver powdery and liquid material 51
- 1 treatment of the balance 52
- Maintenance 52
- 1 checking the balance performance and environment 53
- Checking that the balance performs properly 53
- Checking that the operating environment or weighing method is proper 53
- Operating environment 53
- Sample and container 53
- Troubleshooting 53
- Weighing method 53
- 2 error codes 54
- 3 other display 56
- 4 asking for repair 56
- Accuracy right after calibration using the internal mass 2 accuracy of full scale 57
- Display mode 57
- Display refresh rate 57
- Dust and water protection 57
- External calibration weight 57
- External dimensions 57
- Interface provided as standard 57
- Internal mass 57
- Linearity 57
- Maximum display 57
- Mc 10k mc 30k 57
- Minimum weighing value 1 digit 57
- Operating environment 57
- Power supply ac adapter type 57
- Repeatability 1 standard deviation 57
- Sensitivity drift 10 c 30 c 5 57
- Specifications 57
- Stabilization time typical at 57
- Time and clock function 57
- Weighing capacity 57
- Weighing data of data memory 57
- Weighing pan 57
- Weight 57
- 1 external dimensions 58
- 2 options and peripheral instruments 59
- Ad 8121b printer 59
- Ad 8922a remote controller 59
- Ax mc10k 30kpan auto centering pan 59
- 1 terms 61
- Terms index 61
- 2 index 63
Похожие устройства
- Sony NWZ-B183F Pink Сертификат
- Sony NWZ-B183F Pink Инструкция по эксплуатации
- Viewsonic VA926G Инструкция по эксплуатации
- And MC-30K Инструкция по эксплуатации
- Bosch BCH6ATH25K Сертификат
- Bosch BCH6ATH25K Инструкция по эксплуатации
- Viewsonic VA916G Инструкция по эксплуатации
- And MC-1000 Инструкция по эксплуатации
- Siemens NoFrost KG49NSW21R Сертификат
- Siemens NoFrost KG49NSW21R Инструкция по эксплуатации
- Viewsonic VS13694 Инструкция по эксплуатации
- And MC-6100 Инструкция по эксплуатации
- MSI GE70 2PC-003RU Сертификат
- MSI GE70 2PC-003RU Инструкция по эксплуатации
- Viewsonic VX2336S-LED Инструкция по эксплуатации
- And ВМ-20 Инструкция по эксплуатации
- MSI GS70 2OD-094RU Сертификат
- MSI GS70 2OD-094RU Инструкция по эксплуатации
- Viewsonic VA1931W-LED Инструкция по эксплуатации
- Supra M847G Сертификат