Brayer BR1049 [7/36] Cleaning and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1049 [7/36] Cleaning and maintenance

Brayer BR1049 черный [7/0] Cleaning and maintenance
7EN
ATTENTION!
To avoid burns by hot steam, do not bend over the
spout (2).
• Once water starts boiling, the kettle will be switched
o󰀨 automatically. Pour out water and repeat the water
boiling procedure several times.
• Hot water resulting from the rst boilings is not
recommended to consume, you may use it for
domestic needs.
USING THE ELECTRIC KETTLE
• Place the kettle on a solid steady at and non-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
• Ensure that the ON/OFF button (5) is always
accessible and is not blocked by foreign objects.
• Make sure that the kettle is switched o󰀨, the ON/OFF
button (5) is set to the position «0».
• To ll the kettle with water, take it o󰀨 the base (7),
press the lid (3) opening button (4).
• Fill the kettle with water.
• Close the lid (3) and put the full kettle on the base (7).
• Insert the power plug into the mains socket.
ATTENTION!
Handle the electric kettle with care, the glass ask
can break when hit against a solid object or dropped.
• To switch the kettle on, set the ON/OFF button (5) to
the position «I».
• Once water starts boiling, the kettle will be switched
o󰀨 automatically.
• Before removing the kettle from the base (7), make
sure that the kettle is switched o󰀨, the ON/OFF
button (5) is in the position «0».
• After switching the kettle o󰀨, wait for 15-20 seconds,
then you can switch it on again for re-boiling.
• If you need to switch the kettle o󰀨, set the power
switch (5) to the position «0».
• If you accidentally switched the kettle on, but the
water level appeared to be below the minimal mark,
the automatic thermal switch will be on and the kettle
will switch o󰀨.
• Unplug the kettle and let it cool down for 10-15
minutes, then ll the kettle with water and switch it
on, the kettle will operate in normal mode.
CLEANING AND MAINTENANCE
• Before cleaning unplug the kettle, pour out water and
let the kettle cool down.
• Wipe the outer surface of the ask (1) with a slightly
damp cloth and then wipe the ask (1) dry. Use soft
detergents to remove dirt; do not use metal sponges,
abrasive detergents and solvents.
• Do not immerse the electric kettle, the base (7) and
the power cord into water or any other liquids, do not
wash the kettle in the dishwasher.

Содержание

Похожие устройства

Скачать