Damixa 310300000 [11/16] Palace bit

PALACE BIT

Installation of basin mixer

1. Turn off the water system.

2. Attach a flexible connection to the mixer.

3. Important! Screw the flexible eyeliner into the body of the mixer only manually, without any tools and

excessive force to avoid damage.

4. Secure the mixer to the sanitary fixture using the supplied hardware.

5. Connect the flexible supply pipe to the water supply system: the right supply hose to the cold water

supply, and the left one - hot.

6. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the first water start.

7. Turn on the water supply system, check tightness of all connections when the mixer is closed. If

necessary, tighten and seal the connections.

8. Open hot and cold water supply for a while, then close water supply and install (twist) the aerator in place.

Installation of bath and shower mixer with long spout and shower set, and

shower mixer

1. Turn off the water system. Screw eccentric adapters into the pipes of water supply system, having

previously sealed the threaded part with an insulating material. Select position of the eccentric adapters,

where they coincide and correspond to the connecting position of the mixer. The mixer should be placed

horizontally.

2. It is recommended to connect the mixer with the aerator removed (unscrewed) in order to avoid

clogging at the first start-up of water.

3. Install decorative sockets on the eccentric adapters and, using a tool with soft lining, attach the mixer

body. Screw the spout for the bath/shower mixer with multi-purpose spout.

4. Turn on the water supply system, check tightness of all connections when the mixer is closed. If

necessary, tighten and seal the connections.

5. Open hot and cold water supply for a while, then close water supply and install (twist) the aerator in place.

6. For a bath/shower mixer with multi-purpose spout and shower set, attach the shower head to the

hose using gaskets from the kit. Connect the hose to the shower outlet on the faucet body. Install the wall

shower holder in a place convenient for you.

Care recommendations

Modern plumbing equipment, kitchen and shower faucets are made of a variety of materials depending

on the functional features and design that are in demand in the market. To avoid damage when cleaning

take certain criteria into account.

Mixer care products

Cleaning agents are required to remove lime deposits.

Follow these rules during cleaning:

1. Never use products containing hydrochloric, formic or acetic acid, as they can cause significant damage.

2. For the same reasons, it is recommended to use phosphoric acid on a limited scale.

3. Never mix different cleaning products.

4. Never use abrasive cleaners or devices (for example, some cleaning powders and microfiber sponges).