Fubag 300/12 [4/17] Preparing to charge

www.fubag.ru

Omperator's anual

--3

3. Preparing to charge

-I

Determine voltage of battery by referring to car owner s manual.

f it is necessary to remove battery from vehicle to charge, or to clean terminals, always remove

grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to

cause an arc.

Clean battery terminals. Be careful to keep corrosion from coming in contact with eyes.

Add distilled water in each cell until battery acid reaches level specified by battery manufacturer.

This helps purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully

follow manufacturers recharging instructions.

Study all battery manufacturers specific precautions such as removing or not removing cell caps

while charging and recommended rates of charge.

Be sure area around battery is well ventilated while battery is being charged. Gas can be force fully

blown away by using a piece of cardboard or other nonmetallic material such as a fan.

Make sure the initial charging rate is not over battery manufacturers suggestion.

4. Description

This charger can easily be configured to charge many different types of 12V lead-acid batteries; wet

batteries, MF,AGM and most GEL-batteries.

The following recommendations should, however, only be seen as guidelines. When in doubt,

always consult the battery manufacturer for further instructions

This charger have engine boost function, press

This battery charger has also a 12V DC output socket which provides working current up to 12Amp

for any 12V DC operated appliance

- 2А, attery capacity 6 20Ah

- 6А, attery capacity 20 40Ah

- 10А, attery capacity 40 100Ah

- 15А, attery capacity 50 300Ah

ate setting

for b -

button