Accesstyle ECD-A/12-25/HMS Руководство по эксплуатации онлайн [3/7] 800476
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Accesstyle ECD-A/12-25/HMS Руководство по эксплуатации онлайн [3/7] 800476

Accesstyle ECD-A/12-25/SBS Руководство по эксплуатации онлайн [3/7] 800487
Number of torque steps
18+1
Idle speed
1350 rpm
Rotation speed I
0-350 rpm
Rotation speed II
0-1350 rpm
Chuck type
quick-clamping
Chuck diameter
0-10 mm
Noise level
60 dB up to 1.5 m
A set of hand tools and accessories included*
no
yes
Individual packing
cardboard box
plastic box
Moisture protection
IP20
* В набор ручного инструмента и оснастки входят следующие предметы
drills (metal, concrete, wood)
6 pcs
nozzle-bit combined slotted/ cross
1 pc
set of bits (slotted, cross) in a plastic case
1 pc
socket head 5mm-13mm
9 pcs
socket adapter
1 pc
slotted screwdriver
1 pc
cross screwdriver
1 pc
hammer
1 pc
pliers
1 pc
knife
1 pc
tape measure 3m
1 pc
gauge level
1 pc
electric tester
1 pc
insulating tape
1 pc
ATTENTION! The design, equipment and specifications of the tool are subject to change without prior notice.
3. SAFETY
You don’t need to use personal protective equipment against electric shock when operating a drill driver: the
electrical safety of the tool is ensured by safe electric drive voltage.
WHEN OPERATING THE POWER TOOL DO NOT:
• Before starting to work with the tool, make sure that the working conditions comply with the requirements
of this manual;
• Exercise extreme caution when working in an electrical wiring area.
• Protect power tools from rain and moisture;
• Protect cord from heat, oil, sharp edges, or moving parts of power tools.
• Use an appropriate extension cord when working outdoors.
• If it is unavoidable to use the power tool in a damp environment, install a residual current differential switch
or residual current device (RCD).
• Be extremely careful! Inattention while operating a power tool can result in serious injury;
• Use personal protective equipment: goggles, protective mask, shoes with non-slip soles, protective helmet,
hearing protection, depending on the type of work with power tools;
• Do not accidentally start the power tool. Before connecting the tool to the mains and/or battery, make sure
that the power tool is turned off.
• The position of the body should be natural. Always take a stable position and keep your balance.

Содержание

Похожие устройства

Скачать