AM.PM F42885A14 [3/24] Warning

AM.PM F42890A14 [3/24] Warning
3
English
Important notes
about installation
The product must be tted exclusively
bya specialist sanitary engineer.
To prevent injuries gloves should be
worn during installation.
Generally accepted engineering prac-
tices should be applied. (In particular,
compliance with DIN EN 1717 is recom-
mended).
The hot and cold supplies must be
ofequal pressures before installation
ofmixers.
Technical Data
Operating pressure:
max. 1 MPa
Recommended
operating pressure:
0,1 – 0,5 MPa
Hot water temperature:
max. 75°C
Recommended hot water
temperature:
65°C
Thermal disinfection:
70°C (3 min)
The product is exclusively designed
fordrinking water.
Maintenance
recommendations
To avoid lime spots at the product it is
recommended to be regularly cleaned.
The cleaning should be carried out by
soap solution with the following rinse
with water and removing moisture by
dry soft cloth.
Remains of liquid soap, shampoo and
shower gel may also cause damages
of decorative cover. In case of their
penetration onto the diverter housing it
should be thoroughly cleaned with clean
water
To avoid damages of product surface it
is forbidden to use abrasive solutions
and pastes for its cleaning.
To avoid changes color of decorative
cover it is forbidden to use chemicals
for cleaning that contain aggressive
chemical substances of acids, alkali, am-
monium chloride and other components
containing chlorine.
Producer reserves the right without
prior notice to introduce alterations into
design and component parts of devices.
WARNING
Drain system completely if danger
offrost.
Скачать