HUTT DDC55 White [5/21] Introduction to cleaning method
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

HUTT DDC55 White [5/21] Introduction to cleaning method

HUTT DDC55 White [5/21] Introduction to cleaning method
1.3 Introduction to Standard Operating Method
Dry-wiping method
Wet-wiping method
Wipe with a completely dry rag.
① Method 1:
Operating Method Specifics
Introduction to cleaning method
S/N
Name of Operating
Method
1
2
3
4
5
6
Spray an appropriate amount of water on the completely dry rag with the
spraying canister. It is recommended to spray water about 10-15 times,
adjusting the number of sprays according to environmental conditions. In
a dry environment, spray more water; in a humid environment, spray less
water.
① Method 2:
In a high temperature, dry and artificially inaccessible environment, wet
the rag and wring it out, drying it to a humidity similar to that of clothes
dried by washing machine, then wipe the window with the rag.
If there are hard particles or dust on the glass, there is a risk of scratching
the glass. It is recommended to wipe the glass manually and then wipe it
with this product.
After using the machine, replace the used rag with a clean and dry rag, or
store the machine without a rag.
After working in wet-wiping mode, the machine can be placed in a dry,
ventilated and cool place for 1-2 days to dissipate the moisture inside the
machine before storage.
If the turntable is removed, install it according to the position of the
matching port indicated on the label of the turntable, ensuring that each
mount is installed in place to avoid air leakage and falling.
After the machine is connected to the power source, the battery will
automatically charge.
If manual wiping is not possible, it is recommended to wipe the glass
twice with the machine, using the dry-wiping method for the first time to
reduce scratches; then wet-wiping for the second time.
※ It is forbidden to wipe the window with a rag other than the above-mentioned
degree of wetness. In particular, rags with a high degree of wetness, such as a rag
wrung out after soaking, will cause the machine to slip or even fall due to its
wetness.
※ Make sure to use the rag that came with the machine, otherwise the performance
of the machine will be affected.
※ After dry-wiping, a new and clean rag should be used for wet-wiping.
Cleaning method when the glass
glue is dirty and there are a lot of
larger particles on the glass
Storage of the machine
Turntable installation
Charging
3

Содержание

Похожие устройства

Скачать