![RUNZEL RZL-830 FORDIG Руководство по эксплуатации онлайн [13/36] 802087](/img/pdf.png)
RUNZEL RZL-830 FORDIG Руководство по эксплуатации онлайн [13/36] 802087
![RUNZEL RZL-830 FORDIG Руководство по эксплуатации онлайн [13/36] 802087](/views2/2033841/page13/bgd.png)
Page 13 of 36 Runzel RZL-830 Fördig © RLC Grupp 2023 (ENG)
• Never ll up the device with hot water.
• Close the tank cover again and mount the tank into the
device, Figure 10, Figure 11.
• Pull out the cord, insert the plug into the socket and
switch on the device, Figure 12, Figure 13.
• Steam indicator will lit up in approximately one minute;
watch the indicator.
• Holding the brush pull the steam tube out of the casing.
Locate a fabric vertically onto the brush and start ironing
from top downward, Figure 14.
• In the course of operating, there is a sound of owing
water; it is absolutely normal. If you hear such sound,
pull the tube upward.
• In order to extend the service life of the device, it
is necessary to empty the tank upon completion of
operation and to switch on the device for 5 minutes
in the drying mode to dry it. As soon as steam stops
generating, the device may be switched off.
Operation manual for components
Memento: When components are used, they must
be cleaned only in the vertical position; under no
circumstances the components shall be cleaned in
horizontal position.
• Before using the components, read attentively the
manual; moreover, we recommend a test run with an
obsolete fabric.
Brush
• The brush is intended for the steam to penetrate into
fabric more effectively, thus enhancing the ironing
process.
• Memento: Get the device cooled before mounting the
brush.
• To mount the brush, remove a screw cap, then slightly
press the nozzle and lock up the clamp.
• Move the device with brush from top downward. Before
dismounting the brush, switch the device off. If no
steam is coming from the brush, it may be removed.
Never touch the elements made of stainless steel, it
may lead to burns.
Iron tire
• The tire helps to easily iron the edging and shrink
cloth.
• Mount the tire on brushes and x it in the right
position.
1
2
3
4
Содержание
Похожие устройства
- Korting KNFM 84799 XN Руководство по эксплуатации
- EXITEQ PFH 640 STGB-E/B Инструкция по эксплуатации
- Korting KNFC 72337 X Руководство по эксплуатации
- Nordfrost RFQ 510 NFH inverter Инструкция по эксплуатации
- Korting KNFC 72337 XN Руководство по эксплуатации
- Rockdale Etude 128 Graded белое Руководство по эксплуатации
- Rockdale Etude 128 Graded черное Руководство по эксплуатации
- Rockdale Etude 128 Graded коричневое Руководство по эксплуатации
- Korting KNFM 91868 GN Руководство по эксплуатации
- Korting KNFM 91868 X Руководство по эксплуатации
- Galaxy Line GL4702 Руководство по эксплуатации
- Philips TAT1108BK/00 Руководство по эксплуатации
- Ballu BDI-100L Руководство по эксплуатации
- Platforma FW MIG195 Руководство по эксплуатации
- Tefal TY2038WO Руководство по эксплуатации
- Korting KNFC 62980 серебристый Руководство по эксплуатации
- Ставр ТБ-2000ШР Руководство по эксплуатации
- Korting KNFC 62980 GN Руководство по эксплуатации
- Atlas Sport 312 см (10ft) inside GREEN Руководство по эксплуатации
- Platforma FW MIG205 Руководство по эксплуатации