Aqara JT-BZ-03AQ/A [4/42] Installation and usage

Installation and Usage

Please confirm that communication between the Smart Natural Gas

Detector and the Aqara Zigbee 3.0 hub works normally, and then install

and fix it in position.

1.The detector should be installed indoors and located in the same

room with the stove or gas source.

2. The detector should be installed within a horizontal distance of more

than 1 meter and less than 4 meters from the stove, and the height

should be more than 0.5 meters above the stove for wall mount

installation, with the distance from the ceiling less than0.3 meters.

3. The detector should not be installed directly above the stove or on

any position that can be directly aﬀected by the exhaust, steam and

cooking fume from the stove.

4. The detector should not be installed near the fans, air conditioners,

fresh air entrances and exits where the wind speed is too fast.

*If adding fails, please move the product closer to thehub and try again.

*For the description of the preheat function, please see the description of the preheat

function.

Installation Instructions