Kuppersberg RFFI 184 BEG [41/88] Adjust plastic feet
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg RFFI 184 BEG [41/88] Adjust plastic feet

Kuppersberg RFFI 184 BEG [41/88] Adjust plastic feet
41
ENGLISH TECHNICAL PASSPORT
French door refrigerator
INSTALLATION
TRANSPORT
 Do not carry the refrigerator hori-
zontally or reversely.
 Do not carry the refrigerator by
holding the door or handle; the refrig-
erator shall be carried by lifting the bot-
tom.
PLACE ENVIRONMENT
 The refrigerator must be placed
on a hard, at ground; if cushioning
is needed, stable, hard, nonammable
cushion blocks shall be used, rather
than the foam backing of refrigerator.
 The refrigerator shall be kept
away from damp locations where water
is easy to splash; water or dirt shall be
removed with soft cloth timely to pre-
vent rusting which may have an effect
on the electrical characteristics.
 Place the refrigerator in a well-
ventilated place, reserve a certain space
around and behind the refrigerator, and
do not cover or block the air grille on
the rear cover plate of compressor at
the back of refrigerator; Keep the refrig-
erator away from heat source or direct
sunlight.
ADJUST PLASTIC FEET
 When the refrigerator stays in
the packing box, plastic feet are in
tightened state. After carrying it out
from the packing box for placement,
please make sure to adjust two front
plastic feet until the height is suitable;
just adjust two plastic feet with a
wrench or directly by hand.
 Plastic feet and rear rollers
must touch the ground to prevent the
refrigerator from movement, vibration
or noise. When moving the refrigerator,
adjust plastic feet counterclockwise
to keep them off the ground, and then
push the refrigerator gently to move it.

Содержание

Похожие устройства

Скачать