KRAFT KM-MV3200GR [19/40] Description of modes

KRAFT KM-MV3200BL [19/40] Description of modes
19
electric oven
USer GUiDe
DESCRIPTION OF MODES
INSTALLATION AND CONNECTION
This product should be installed and used in strict accordance with the instructions in this
manual and with applicable state and local standards and regulations.
The room must be well ventilated, with ventilation installed, make sure that it is well ventilated.
Consult your qualified installer if you are not sure what kind of ventilation you will need.
Vents must have a cross-section of at least 100 cm
2
and must be protected from accidental
blocking (protection with metal bars or nets). Make sure that there is no other furniture
behind the back of the electric oven.
The air flow between the adjacent room and the room where the appliance is installed must
be free through permanent openings (which can be obtained by increasing the gap between
the door and the floor).
The electric oven must be installed steadily on a flat surface away from heating appliances
and materials.
All furniture adjacent to the electric oven must withstand a temperature of at least 85°C
above the average room temperature. The distance to the adjacent walls and kitchen
furniture should be at least 2 cm.
It is not recommended to install the appliance near refrigerators or freezers, in order to
reduce their performance.
Regulation
of temperature
Installation
of the timer
Preparation
mode choice
Timer: it is possible to set the timer from 0
to 90 min. The furnace will always work before
its switch-off manually, at the same time the
indicator of operation of the furnace burns.
Installation of temperature: Temperature
is regulated in the range from 50 to 320. After
the furnace was warmed up to the given
temperature, the heating element can be
disconnected by the thermostat.
The upper heating Teng works.
The lower heating Teng works.
The upper and lower heating ten work.
Operation indicator

Содержание

Похожие устройства

Скачать