KRAFT KM-MV4500BL [20/40] Electrical connection

electric oven

USer GUiDe

• It is not recommended to install the appliance near refrigerators or freezers, in order to

reduce their performance.

• The buyer is responsible for installing the appliance. Assistance provided by the manufacturer

due to incorrect installation is not included in the warranty.

ELECTRICAL CONNECTION

ATTENTION! The appliance must be connected to the main electrical network

in accordance with applicable laws and regulations.

• Make sure that the power from the main network is suicient for the power supply system is

grounded in accordance with current regulations, and the power cable does not come into

contact with the heated elements.

• Do not use adapters, extension cords, or «tees» to connect the appliance.

• If you need to replace the power cord, make sure that it meets current standards and meets

the product specications.

GROUNDING

• This appliance requires grounding to protect it from short circuits and electrical

dissipation. It is equipped with a grounded plug installed on the power cord. Therefore,

the appliance must be connected to an appropriate electrical outlet.

• The installation, connection and grounding of the electrical system must correspond to

the provisions of European standards, as well as applicable local regulations.

• The ground cable must not be interrupted by a switch. If your apartment does not have

a ground connection, contact a qualified electrician to install it.

ATTENTION! Before servicing the product, turn off the electrical power completely.

The manufacturer is not responsible for any direct or indirect damage caused by incorrect

installation or connection. Therefore, all installation and connection operations must be

performed by qualified personnel in accordance with applicable local and general regulations.

EXPLOITATION

1. Aer storing the appliance in a warehouse or transporting it at a temperature below 15 °C, it

must be kept at room temperature for at least 6 hours before switching it on.

2. Check the power supply characteristics, then connect the appliance to a power source.

3. Make sure that the air vents are not closed. Open the window for air circulation.

Set the power controls to the maximum level. Heat an empty oven for 5 – 10 minutes.

ATTENTION! When you connect the appliance for the rst time, you may see an

unpleasant smell of burning, this is considered the norm, because the outer surface of

the heating elements may contain factory insulation materials necessary for corrosion

protection. It will disappear after 5 minutes.