Brayer BR4975 [7/40] Before the first use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR4975 [7/40] Before the first use

Brayer BR4975 [7/40] Before the first use
7EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power supply
voltage of the unit correspond to the specications
of your mains. No additional settings required when
using the device in the mains with 60 Hz frequency.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
FAN ASSEMBLY
• Fan is supplied with its Base (1) disassembled. Do not
turn on the fan without the Base (1).
• Loosen the shaped fastening screws on the bottom
of the fan housing by rotating them counterclockwise
(Fig. 1).
• Thread the power cable through the opening between
the two halves of the Base (1).
• Align the two halves of the Base (1) and join them so
that the locks would trigger.
• Route the power cord into the corresponding grooves
(Fig. 3).
• Align the protrusions on the lower part of the fan
housing with the holes on the base (1), x the base
(1) by tightening the shaped screws clockwise along
the thread (Fig. 4).
• Making sure that the Base (1) is properly secured (g. 3).
REMOTE CONTROL (17)
ATTENTION! A lithium battery is used in the remote
control. To avoid danger, do not allow children to
play with the battery. If your child has swallowed a
battery, immediately see a doctor.
Battery installation/replacing
• Press on the clamp and remove the battery holder
(24) from the remote control (17) body, insert a
CR2025 battery (are not included) into the holder,
strictly following the polarity.
• Install the battery holder (24) into the remote control
(17).
Notes:
- if there is an isolation insert in the battery holder
(24), remove the insert;

Содержание

Похожие устройства

Скачать