Brayer BR1203 [6/32] Using the blender
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1203 [6/32] Using the blender

Brayer BR1203 [6/32] Using the blender
6 EN
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specications of the
power supply voltage of the unit correspond to the
specications of your mains. When the unit is powered
from 60 Hz frequency mains, no additional actions are
necessary.
• Remove the lid (2) and remove the measuring cup (1).
• Wash the bowl (3), the lid (2) and the measuring cup
(1) with warm water and neutral detergent, rinse and
dry them.
• The cutting edges of the chopping knives (5) are sharp
and can be dangerous, handle the chopping knives
(5) carefully.
• Clean the motor unit body (7) with a soft, slightly damp
cloth, and then wipe it dry.
• Do not immerse the unit, the power cord and the
power plug of the unit into water or other liquids.
USING THE BLENDER
ATTENTION! Continuous operation time of the
blender should not exceed 1 minute, after that
make at least 1 minute break.
Note: — when using the unit for the rst time, a foreign
smell from the electric motor can appear — this is normal
and it is not covered by warranty.
• Place the blender on a at dry and steady surface.
• Place the blender bowl (3) on the motor unit (7) and
turn it counterclockwise (g. 1).
• Put the necessary ingredients into the bowl (3).
• Cover the bowl (3) with the lid (2).
• Insert the measuring cup (1) into the lid (2) opening.
• Always use the blender only with the lid (2) with the
seal (2) installed and with the measuring cup (1)
installed in the lid (2) (g. 2).
Notes:
- the blender is not designed to beat eggs, prepare
mashed potatoes, knead dough, squeeze juice
from fruits and vegetables, chop solid and frozen
foods (except ice), chop meat and meat products;
- the amount of food for processing should not
exceed 2/3 of the capacity of the bowl (3) and
should not be below the minimal mark «500» on
the bowl (3);
- use the scale on the bowl (3) to control the amount
of products to process;
- before starting to chop/mix, we recommend to
peel fruit, remove stones, and cut fruit into 2х2 cm
cubes;
- when processing carrots, use a carrot to water
weight ratio of 2:3. For example, if you weigh about
700 g of carrots, add about 1.05 liters of water.
• Connect the power plug to an mains outlet.
• To switch the blender on and select the chopping
knives (5) turn the knob (9) from «1» to «5» to switch
on the blender and to select the rotation speed of the
chopper knives (5), and the light (8) will illuminate.
• During the operation or between the operation cycles,

Содержание

Похожие устройства

Скачать