Kuppersberg INTRO 70 WHITE [17/44] Aluminum filter
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg INTRO 70 WHITE [17/44] Aluminum filter

Kuppersberg INTRO 70 WHITE [17/44] Aluminum filter
17
ENGLISH TECHNICAL PASSPORT
Extractor hood
SECTION 3.
Cleaning and maintenance
Caution! Before you start cleaning
the appliance, disconnect it from the
power supply.
Aluminum lter
Aluminum lter is designed to trap
grease particles out of the ow of air
running through it. For this reason,
the lter needs regular cleaning. The
cleaning interval depends on the
frequency of use of the air cleaner.
Generally, it is recommended to clean it
once a month.
To do this, remove the lters, wash
them in water with a neutral liquid
detergent, dry them, then set them back
in the air cleaner. Over time, lters may
change color due to a regular washing.
This is a natural process, which does not
indicate a defect, so lter replacement
is not required.
The aluminum lters can be washed
in the dishwasher.
How to remove aluminum
lters:
1. Press on the latch of the lter lock.
2. Pulling down a bit, remove the
lter.
In order to put the lters in place
after cleaning, follow the above
instructions in reverse order.
Carbon lter (used in
recirculated air mode)
Carbon lter is designed to trap
odors and fumes while cooking. It is used
in cases where there is no possibility
to connect the air cleaner to a special
ventilation duct for discharging air
outward. When operating the appliance
with a carbon lter, contaminated air is
sucked into the appliance and passes
through a carbon lter, and then clean
air is supplied to the kitchen.
The carbon lter should be replaced
at regular intervals. The interval of
lter replacement depends on the
frequency of use of the air cleaner,
style of cooking and frequency of the
aluminum lter cleaning. Generally, it
is recommended to replace the carbon
lter once every 4 months.
How to remove carbon filter:
1. Remove aluminum lters.
2. Turn the carbon lter to the left
and pull it.
3. Replace the old carbon lter with
the new one.
4. Put the lter back into place.
If necessary, clean the outside of the
air cleaner with a soft, damp cloth. Do
not use any abrasive cleaning agents.
For painted stainless steel surfaces: to
avoid scratching it is recommended to

Содержание

Похожие устройства

Скачать