Home
Главная
Brayer
Пылесосы С Контейнером Для Пыли
4201BR
Инструкция по эксплуатации Страница: 10

Brayer 4201BR Инструкция по эксплуатации онлайн [10/48] 806216

Note: provide that the HEPA lter (11) is always clean,

because the overall performance of the vacuum cleaner

depends on it.

Attention!

Before switching on and using the vacuum cleaner,

make sure that the HEPA lter (11), the separator (27),

the dust bin (13) and the outlet lter (4) are installed

properly.

• Take the power plug (1) and unwind the power cord

to the required length, connect the power plug to the

mains socket (pic. 7).

• The yellow mark on the power cord indicates the

maximum cord length. Do not pull out the power cord

further than the red mark.

• Press the on/o󰀨 button (8) to switch the vacuum

cleaner on (pic 8).

• While cleaning, you can control the suction power

using the manual suction power control (21) on the

exible hose handle (19) (pic. 9).

• After you nish cleaning, switch the vacuum cleaner

o󰀨 by pressing the on/o󰀨 button (8) and unplug it.

• To wind the power cord, press the button (2); keep a

hold of the winding cord with your hand.

• If you have to make a break during the cleaning,

switch the vacuum cleaner o󰀨 by pressing the button

(8) and install the brush (15) to the brush storage (7)

(pic. 10).

ATTENTION!

Before changing the attachments or cleaning the

dust bin (13), switch the vacuum cleaner o󰀨 by

pressing the on/o󰀨 button (8) and unplug it.

CLEANING AND MAINTENANCE

Cleaning the dust bin (13)

• It is recommended to remove garbage and dust from

the dust bin (13) after every room cleaning.

• Switch the vacuum cleaner o󰀨 by pressing the on/o󰀨

button (8) and unplug it.

• Holding the handle (13), press the lock (9) and

remove the dust bin (13) (pic.11).

• Place the dust bin (13) over a garbage bin.

• Pull the lock (12) and open the lower lid (25) (pic.

12).

• Remove accumulated dust and garbage from dust

bin (13).

• Close the lid (25).

• Install the dust bin (13) back to its place and make

sure that the dust bin (13) is xed properly.

Cleaning the HEPA lter (11) and the separator (27)

installed in the dust bin (1)

• Clean the lter block (11) at least once a month.

• Preliminarily remove dust and garbage from the dust

bin (13) as described above.

• Pull the upper lid clamp (10) and open the lid

(pic.13).

Brayer 4201BR Инструкция по эксплуатации онлайн [10/48] 806216

Содержание

Похожие устройства