Home
Главная
Brayer
Пылесосы С Контейнером Для Пыли
4201BR
Инструкция по эксплуатации Страница: 11

Brayer 4201BR Инструкция по эксплуатации онлайн [11/48] 806216

• Remove the lter block (11) (pic. 14).

• Turn the dust bin (13) ask clockwise and remove it,

turn the ring (26) clockwise and remove it, remove

the separator (27) by turning it clockwise (pic. 15).

• Wash the separator (27), the ring (26), the dust bin

(13) ask and the lter block (11) under a warm water

jet and dry them (pic. 16, 17).

• Do not wash the parts in a dishwashing machine.

• Thoroughly dry all the parts of the dust bin (13).

• Dry the HEPA lter (19) thoroughly.

• Assemble the dust bin (13) in reverse sequence (pic.

18).

• Install the assembled dust bin (13) back to its place,

make sure that the dust bin (13) is xed properly.

Attention!

Before assembling and installing the dust bin (13) back

to its place, make sure that the HEPA lter (11), the

separator (27) and the ask (13) are dry.

Cleaning the outlet lter (4)

• Switch the vacuum cleaner o󰀨 and unplug the power

cord plug from the mains socket.

• Remove the grid (3) of the outlet HEPA lter (4) by

pressing the clamp, remove the outlet HEPA lter (4)

(pic. 19).

• Remove the outlet lter grid (4), turning it clockwise

and remove the outlet lter (4) (pic.19).

• Wash the outlet lter (4) and the grid (3) under a

lukewarm water jet. Do not wash the outlet lter (4)

and the grid (3) in a dishwashing machine.

• Dry the outlet lter (4) and the grid (3) (pic21).

• Do not dry the HEPA lter (4) with a hairdryer or

similar appliances.

• Install the outlet lter (4) back to its place.

• Install the grid (3) back to its place, turn the grid (18)

counterclockwise as far as it will go.

Vacuum cleaner body

• Clean the vacuum cleaner body with a soft, slightly

damp cloth, and then wipe it dry. Provide that no

liquid gets inside the vacuum cleaner body.

• Do not use solvents or abrasives for cleaning the

vacuum cleaner body and the attachments.

• Do not immerse the vacuum cleaner body, the power

cord and the power plug into water or any other

liquids.

OVERHEATING PROTECTION

• If the electric motor gets too hot during the operation,

the overheating protection system will be set o󰀨.

• If during cleaning the vacuum cleaner has switched

o󰀨, press the on/o󰀨 button (8) and unplug the unit.

• Let the vacuum cleaner cool down for 30-40 minutes

and switch it on again. The cool-down time can

di󰀨er from the given value, depending on the room

temperature.

Brayer 4201BR Инструкция по эксплуатации онлайн [11/48] 806216

Содержание

Похожие устройства